Installation Instructions

Table Of Contents
3.2 Kitchen cabinet setup
Fig. 4
1 Power cord 3 Electrical socket
2 Spirit level 4 Pull-in cable for power cord
A 21-7/32 in. (539 mm) B 69-21/32 in. (1769.5 mm)
C 21-15/16 in. (557 mm) D 69-3/4 in. - 70-3/8 in. (1772 mm) - (1788 mm)
E min. 22 in. (560 mm) F 21-21/32 in. (550 mm)
max. 22-3/4 in. (578 mm) G 1-1/2 in. (38 mm)
J 66-1/2 in. (1689.9 mm) K max. 3/4 in. (19 mm)
L 9-21/32 in. (245 mm)
u
Install the appliance in fixed cabinets only.
u
Build the cabinet with the dimensions shown in
Fig. 4
.
u
Align the cabinet with a spirit level
Fig. 4 (2)
and a try
square. If necessary, level the cabinet up by placing
something underneath.
w
The floor and side walls must be at right angles.
Maintain clearance L to the wall to ensure that the
drawers can be pulled out without obstruction.
u
Maintain the fitting dimensions shown in
Fig. 4
.
3.3 Kitchen cabinet setup for the
water filter*
The water filter module is supplied with the
appliance. It should be installed near the
appliance in the cabinet, for example, in
the adapter cabinet above the appliance.
To connect the filter to the appliance, it
may be necessary to make an opening (C)
in the floor of the adapter cabinet through
which the hoses will be routed. The
maximum length of the water hose is
98-7/16 '' (2.5 m).
Kitchen cabinet setup
* Depending on model and options 5