Design Guide

Fully Integrated
HC 1001/HC 1050 - SBS 20H0, HC 1011/HC 1060 - SBS 20H1, HF 851/HRB 1110 - SBS 19H0
Ventilation through the cabinet base at the bottom can be
achieved by installing the provided ventilation grille (3) or via a
ventilation opening of at least 31 in.² (200 cm²).
When using the provided ventilation grille (3), please proceed
as follows:
- In the cabinet base, cut out a ventilation opening that is 17-
23/32 in. (450 mm) in width and 2-7/32 in. (56 mm) in height.
- Insert ventilation (3) grille into the cabinet base cut-out (1).
- From the back side, slide the snap-fits (2) into the grille until
the hooks make contact with the cabinet base.
- Completely mount cabinet base (with ventilation grille and
snap-fits) to kitchen cabinet.
Kitchen Cabinet Base Grille
4