Owner manual

ManualsBrandsLiebherr ManualsSpecial machineryHS 855 HD Litronic

Complies with ANSI B 30.5

Technical data

Hydraulic crawler crane

HS 855 HD

Summary of content (16 pages)

PAGE 1
Technical data Hydraulic crawler crane HS 855 HD Complies with ANSI B 30.
PAGE 2
Dimensions Basic machine with undercarriage ÑÑ Ñ Ñ Ñ Ñ Operating weight Remarks The operating weight includes the basic machine with HD undercarriage, 2 main winches 55,200 lbs including wire ropes (295 ft) and 36 ft main boom, consisting of A–frame, boom foot (18 ft) and boom head (18 ft), 58,000 lbs basic counterweight, 31.5 inch triple grouser track shoes and 110,250 lbs hook block. Total weight approx. 192,000 lbs 2. Crane standing on firm, horizontal ground. 3.
PAGE 3
Transport dimensions and weights Basic machine and boom Ñ Basic machine ÑÑ Basic machine Ñ Ñ (No. 1311.xx) with HD undercarriage, boom foot (No. 1311.xx), A–frame, 2x 55,200 lbs winches including wire ropes (295 ft), without basic counterweight Width 11’6” Weight in lbs 129,400 with boom foot (No. 1311.
PAGE 4
Transport dimensions and weights Fixed jib (No. 0806.xx) Ñ Fixed jib head (No. 0806.16) Width Weight in lbs* Fixed jib section 45” 980 (No. 0806.15) 10 ft Width Weight in lbs* Fixed jib section ÑÑÑ *) Including pendant straps 38” 245 (No. 0806.15) 20 ft Width Weight in lbs* Fixed jib foot with A-frame 38” 430 (No. 0806.16) Width Weight in lbs* 59” 2,050 Counterweight Counterweight 10x Width Weight in lbs 33.
PAGE 5
Technical description Engine Main winches Power rating according to ISO 9249, 450 kW (603 hp) at 1900 rpm Engine type Liebherr D 9508 A7 Fuel tank 211 gal capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA / CARB Tier 3 and 97/68 EC Stage III Hydraulic system The main pumps are operated by a distributor gearbox. Axial piston displacement pumps work in closed and open circuits supplying oil only when needed (flow control on demand).
PAGE 6
Dragline equipment 58,000 lbs counterweight Working diagram C = Radius / dumping radius J = Height of boom head sheave centre above ground level Ñ ÑÑ Ñ Ñ Capacities in 1000 lbs for boom lengths (46 ft – 95 ft) 46 ft C counterweight 58,000 lbs 56 ft J C 66 ft J C J C 85 ft J C 95 ft J C J α ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs 45 39.0 37.4 37,9 45.9 44.3 30,6 53.1 51.2 25,1 60.0 58.0 22,3 66.9 19.8 19,0 73.8 72.2 16,5 40 41.
PAGE 7
Clamshell equipment 58,000 lbs counterweight Working diagram C = Radius / dumping radius J = Height of boom head sheave centre above ground level K = Length of clamshell (depending on type and capacity of bucket) Ñ Ñ ÑÑ Ñ Capacities in 1000 lbs for boom lengths (46 ft – 95 ft) 46 ft C counterweight 58,000 lbs 56 ft J C 66 ft J C 75 ft J C 85 ft J C 95 ft J C J α ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs ft ft lbs 65 26.6 45.9 56,2 30.5 54.8 48,9 34.
PAGE 8
Equipment Casing oscillator and slurry wall grab ÑÑ ÑÑ Ñ Ñ Ñ Ñ ÑÑ Ñ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ Casing oscillator Winch options Line speed 1st layer (ft/min) Drilling diameter Maximum allowable weight in two rope operation 8 HS 855 HD Ñ Ñ Ñ Ñ Ñ ÑÑ Ñ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏÏÏÏÏÏÏÏ Slurry wall grab 2x 44,100 lbs 0–302 6’7” 2x 55,200 lbs 0–236 6’7” 48,500 lbs 61,750 lbs Winch options Line speed 1st layer (
PAGE 9
Equipment Dynamic soil compaction ÑÑ Ñ ÑÑ Ñ ÑÑ Ñ ÑÑ Ñ Ñ ÑÑ Ñ Capacities in 1000 lbs for boom lengths (66 ft – 105 ft) Boom length Radius in (ft) 66 ft 75 ft 85 ft 95 ft lbs lbs lbs lbs 105 ft lbs 27 55,2 55,2 44,1 44,1 41,9 30 44,1 41,9 41,9 39,7 37,5 Max. capacities in 1000 lbs do not exceed 75% of tipping load. All loads given are max. values and must not be exceeded. They are only permitted in 2 rope automatic operation and are valid for work on a surface with max.
PAGE 10
Working range - main boom (No. 1311.xx) 58,000 lbs counterweight 86° - 15° Auxiliary jib 55,200 lbs ÑÑ The maximum capacity of the auxiliary jib is 55,200 lbs. The corresponding load chart is programmed in the LMI system. Ñ Ñ Ñ Ñ ÑÑ Ñ Ñ ÑÑ Ñ Ñ Main boom configuration (table 1 – No. 1311.
PAGE 11
Lift chart for main boom (No. 1311.xx) 58,000 lbs counterweight Capacities in 1000 lbs for boom lengths (36 ft – 203 ft) – with 55,200 lbs winches 58,000 lbs counterweight Boom length in (ft) Radius 36 46 66 75 85 95 105 115 125 135 144 154 164 174 184 194 203 (ft) lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs 10.5 200.0 Radius (ft) 10.5 15 200.0 200.0 193.8 188.3 178.1 157.7 137.6 115.1 99.4 20 120.4 120.9 121.2 121.2 121.2 119.
PAGE 12
Lift chart for main boom (No. 1311.xx) 71,200 lbs counterweight and 33,100 lbs carbody counterweight Capacities in 1000 lbs for boom lengths (36 ft – 223 ft) – with 55,200 lbs winches 71,200 lbs counterweight and 33,100 lbs carbody counterweight Boom length in (ft) Radius 36 56 66 85 105 115 125 135 144 154 164 174 184 194 203 213 223 Radius (ft) lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs lbs (ft) 8.5 230.0* 10 230.0* 230.0* 15 198.4 194.
PAGE 13
Working range - fixed jib (No. 0806.
PAGE 14
Lift chart - fixed jib (No. 0806.xx) Offset 15° Main boom 36 ft Radius (ft) 16.8 35 40 50 55 60 65 80 95 110 120 130 Fixed jib length in (ft) 36 66 85 105 lbs lbs lbs lbs 60.4 41.8 25.1 38.8 23.4 16.2 34.9 21.0 13.1 9.5 33.6 20.2 12.5 9.2 32.2 19.5 11.9 8.9 30.4 18.9 11.4 8.7 16.3 10.1 8.0 14.5 9.0 7.5 8.4 7.2 7.0 6.8 Main boom 105 ft Radius (ft) 24 40 50 60 80 90 100 110 120 150 170 190 Fixed jib length in (ft) 36 66 85 105 lbs lbs lbs lbs 48.4 39.3 21.7 36.5 20.3 13.2 32.0 19.5 12.5 8.9 21.2 18.
PAGE 15
Lift chart - fixed jib (No. 0806.xx) Offset 30° Main boom 36 ft Radius (ft) 25.5 50 60 65 75 90 95 110 115 120 130 135 Fixed jib length in (ft) 36 66 85 105 lbs lbs lbs lbs 40.7 26.2 16.3 23.2 14.5 11.9 22.2 13.8 10.3 12.5 9.6 7.7 11.2 8.7 6.9 11.0 8.4 6.7 7.8 6.1 7.7 5.9 5.8 5.5 5.5 Main boom 105 ft Radius (ft) 32.7 55 70 80 90 100 110 120 125 155 175 195 Fixed jib length in (ft) 36 66 85 105 lbs lbs lbs lbs 35.8 30.5 16.0 26.5 14.9 10.2 21.8 14.0 9.8 7.9 18.2 13.4 9.5 7.2 15.4 12.7 9.1 6.9 13.1 12.
PAGE 16
Self assembly system Ñ ÑÑ Ñ Ñ Ñ ÑÑ ÑÑ Unloading of basic machine (option) Ñ Unloading and assembly of crawlers Ñ Ñ Ñ ÑÑ Ñ Ñ Ñ Unloading and assembly of carbody counterweight Ñ Ñ Ñ Unloading and assembly of counterweight Ñ Ñ Ñ Ñ Liebherr-Werk Nenzing GmbH P.O. Box 10, A–6710 Nenzing/Austria Tel.: +43 50809 41 – 473 Fax: +43 50809 41 – 499 crawler.crane@liebherr.com www.liebherr.