Installation Sheet

12
2. Route the power cord towards the electrical outlet.
1. HW 8000 - Remove the transportation safety
component.
3. Slide the appliance two-thirds of the way into the
kitchen cabinet.
When sliding in the appliance, make sure that the power
cord is not damaged.
4. Screwintheadjustablefeetasfarastheywillgo.
Installing the Appliance
Note
Check the installation dimensions before installation.
The intermediate panel and side wall of the kitchen
cabinet must be perpendicular to each other.
3.
The installation work should only be carried out by
trained personnel.
Two people are required for the installation work.
WARNING!
Fire hazard from short-circuiting!
- When pushing the appliance into the
recess, take care not to crush, jam or
damage the power cord.
-Donotoperatetheappliancewitha
defective power cord.
WARNING!
Fire hazard due to dampness!
If live parts or the power cord become
damp, this may cause short circuits.
- The appliance is designed for use
inenclosedareas.Donotoperatethe
appliance outdoors or in areas where
itisexposedtosplashwaterordamp
conditions.
- Only use the appliance when it is
installed.
1.
4.
i nsTallaTion