Installation Manual

6
i nsTallaTion
Installing the Appliance
1. Route the power
cord towards the
electrical outlet.
2. Slide the appliance into the
recess.
3. Check the height alignment of the appliance.
4.Adjustthefeettotherequiredheightifnecessary.
The feet can be turned by hand; if they do not turn
easily, use the open-end wrench provided.
Slide the appliance into the recess.
Note
Hold the appliance using
the handles underneath to
transport it.
CAUTION!
Risk of damage and injury if the appliance
falls.
Do not install the appliance alone.
Fitting and removing the appliance is a job
for two people.
Note
The appliance must be removed from the
recesstoadjustthefeetonitsunderside.
IMPORTANT
When sliding in the appliance, make sure not to
damage the power cord.
WARNING!
Immediately replace any power cord that
has become frayed or shows signs of
damage.