Mobile Harbour Crane LHM 120
Main dimensions Bulk operation Load diagram 50 42 40 Capacity (t) on the ropes 30 motor grab 24 20 10 4-rope grab 0 0 5 10 15 20 25 30 35 Above quay max. 34 m (depending on grab) Coastal Bulk Carrier 9m 2 LHM 120 Below quay 13 m Boom fulcrum 10.1 m Eye level 15.2 m 19.
Bulk operation Maximum crane capacity 42 t Hook operation Grab operation Outreach on the ropes 4-rope grab motor grab (m) 8-11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (t) 42.0 42.0 37.7 33.8 30.5 27.5 25.1 23.0 21.2 19.6 18.2 17.1 16.1 15.2 14.4 13.7 13.0 12.3 11.6 11.0 (t) 24.0 24.0 24.0 24.0 21.7 19.6 17.8 16.3 15.0 13.9 13.0 12.2 11.5 10.8 10.2 9.7 9.2 8.7 8.3 7.8 (t) 30.0 29.9 26.8 24.1 21.7 19.6 17.8 16.3 15.0 13.9 13.0 12.2 11.5 10.8 10.2 9.7 9.2 8.7 8.3 7.
Main dimensions General cargo operation Load diagram 50 42 40 on the ropes Capacity (t) 36 30 20 10 semi-automatic spreader 20´ 0 0 5 10 15 20 25 30 35 Above quay max. 34 m Coastal Vessel 9m 4 LHM 120 Below quay 13 m Boom fulcrum 10.1 m Eye level 15.2 m 19.
General cargo operation Maximum crane capacity 42 t Hook operation Capacity under spreader semisemiOutreach on the ropes automatic 20´ automatic 40´ (m) 8-11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 (t) 42.0 42.0 37.7 33.8 30.5 27.5 25.1 23.0 21.2 19.6 18.2 17.1 16.1 15.2 14.4 13.7 13.0 12.3 11.6 11.0 (t) 36.0 36.0 34.9 31.0 27.7 24.7 22.3 20.2 18.4 16.8 15.4 14.3 13.3 12.4 11.6 10.9 10.2 9.5 8.8 8.2 (t) 36.0 36.0 33.6 29.7 26.4 23.4 21.0 18.9 17.1 15.5 14.1 13.0 12.0 11.1 10.3 9.6 8.9 8.
Undercarriage Mobility Modular propping system • Outstanding mobility and manoeuvrability • Curves at any possible radii and even slewing on the spot • Minimised stress and strain of undercarriage due to cruciform support base which directs the load path from boom tip to quay • Modular system allows further reduction of quay loads by installing additional axle sets • Easy adaptation to various sizes of support pads and bases longitudinally diagonally Optional wheel sets 9 m 0.8 m 5. 5 m 5.
Technical data Capacity and Classification Propping arrangements Capacity Classification Standard supporting base Standard pad dimension Standard supporting area of pads Grab operation < 19 t A8 Grab operation < 24 t A7 General cargo < 30 t A6 42 t A4 Heavy lift 9mx9 m 4 x 5.5 m x 0.8 m 4.4 m2 Optional size of supporting pads and bases on request Quay load arrangements Uniformly distributed load Max. load per tyre Main dimensions Min. to max.
Practical solutions • The Liebherr Portal Crane, LPS, is an efficient combination of a space-saving portal (mounted on rails) and the proven mobile harbour crane concept. Particularly on narrow quays, individual portal solutions permit (railway) trains and (road) trucks to travel below the portal. Liebherr-Werk Nenzing GmbH P.O. Box 10, A-6710 Nenzing/Austria Tel.: +43 50809 41-725 Fax: +43 50809 41-447 mobile.harbour.crane@liebherr.com www.liebherr.
