Mobile Harbour Crane LHM 280
Main dimensions Bulk operation Load diagram 90 80 on the ropes Capacity (t) 70 60 50 motor grab 40 4-rope grab 30 20 10 0 0 5 10 15 20 25 30 35 40 45 Above quay max. 48 m (depending on grab) Eye level 20.8 m Boom fulcrum 15.4 m Handymax Bulk Carrier Below quay 12 m 28.
Bulk operation Maximum crane capacity 84 t Hook operation Maximum crane capacity 64 t Grab operation Hook operation Grab operation Outreach on the ropes 4-rope grab motor grab Outreach on the ropes 4-rope grab motor grab (m) (t) (t) (t) (m) (t) (t) (t) 10 84.0 45.0 52.0 10 64.0 35.0 42.0 11 84.0 45.0 52.0 11 64.0 35.0 42.0 64.0 35.0 42.0 12 84.0 45.0 52.0 12 13 84.0 45.0 52.0 13 64.0 35.0 42.0 14 84.0 45.0 52.0 14 64.0 35.0 42.0 15 84.0 45.0 52.
Main dimensions Container operation Load diagram 90 80 on the ropes Capacity (t) 70 60 50 40 se mi- 30 20 aut automatic spreader 10 om atic spre ader 0 0 5 10 15 20 25 30 35 40 45 4 5 6 7 8 9 Handy Sized Vessel 11 m 4 LHM 280 10 11 Above quay max. 48 m 3 Below quay 12 m 2 Eye level 20.8 m 1 Boom fulcrum 15.4 m 28.
Container operation Maximum crane capacity 84 t Maximum crane capacity 64 t Hook operation Capacity under 40´ spreader Hook operation Capacity under 40´ spreader Outreach on the ropes automatic semi-automatic Outreach on the ropes automatic semi-automatic (m) (t) (t) (t) (m) (t) (t) (t) 10 84.0 41.0 36.0 10 64.0 41.0 36.0 11 84.0 41.0 36.0 11 64.0 41.0 36.0 12 84.0 41.0 36.0 12 64.0 41.0 36.0 13 84.0 41.0 36.0 13 64.0 41.0 36.0 14 84.0 41.0 36.
Undercarriage Mobility Modular propping system • Outstanding mobility and manoeuvrability • Curves at any possible radii and even slewing on the spot • Minimised stress and strain of undercarriage due to cruciform support base which directs the load path from boom tip to quay • Modular system allows further reduction of quay loads by installing additional axle sets • Easy adaptation to various sizes of support pads and bases longitudinally diagonally 11 1.3 m m 5. 5 m 5.
Technical data Capacity and Classification Propping arrangements Capacity Classification Standard supporting base 11 m x 11 m Standard pad dimension 4 x 5.5 m x 1.3 m Standard supporting area of pads 7.15 m2 Optional size of supporting pads and bases on request Grab operation < 36 t A8 Grab operation < 45 t A7 Container < 55 t A6 Heavy lift 84 t A4 Quay load arrangements Main dimensions Min. to max.
Practical solutions • The Liebherr Portal Crane, LPS, is an efficient combination of a space-saving portal (mounted on rails) and the proven mobile harbour crane concept. Particularly on narrow quays, individual portal solutions permit (railway) trains and (road) trucks to travel below the portal. Liebherr-Werk Nenzing GmbH P.O. Box 10, A-6710 Nenzing/Austria Tel.: +43 50809 41-725 Fax: +43 50809 41-447 mobile.harbour.crane@liebherr.com www.liebherr.
