Technical data Piling and drilling rig LRB 125
Concept and characteristics Leader top Auxiliary winch Leader Vertical travel device Tool with quick connection Inclination device Leader rotation device Parallel kinematics Radius adjustment device Undercarriage • High engine output with automatic engine speed control • Controlled entirely from cab • Sturdy and solid rig design • Wide longitudinal and lateral supporting system on the basic machine through triangles • High push and pull forces • High torque • Completely self–rigging (no auxiliary m
Transport dimensions and weights 13650 incl. aux. winch 3400 2850 1180 6900 5100 1120 1000 1600 3000 Transport weight* Without attachment, with telescopic undercarriage and counterweight Without attachment and counterweight, with telescopic undercarriage 43 t 39.1 t *) Weights can vary with the final configuration of the machine.
Dimensions Basic machine LRB 125 1:6 2.8° 2.8° 2300 15500 1:3 3670 3150 5350 700 4200 90° 90° Leader length 12.5 m Operating weight and ground pressure Capacity hammer including cap plus pile Max. hammer weight Max. pile weight Max. pull Max.
Technical description Engine Swing Power rating according to ISO 9249, 450 kW (603 hp) at 1900 rpm Engine type Liebherr D 9508 A7 Fuel tank 870 l capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA/CARB Tier 3 and 97/68 EC Stage III. Consists of single row ballbearing, fixed axial piston hydraulic motor, spring loaded and hydraulically released multi–disc holding brake, planetary gearbox and pinion. Swing speed from 0 – 3.
High frequency vibrator slim design Model 1100 H Vibrating of single pile between two other piles Effective length – 15.5 m Display for vibrating Technical data Static moment Max. frequency Max. centrifugal force Max.
High frequency vibrator Model 23 VML with hydraulic sheet pile feeder Double clamp and hydraulic sheet pile feeder Effective length – 15.5 m Display for vibrating Technical data Static moment Max. frequency Max. centrifugal force Max. amplitude Total weight without clamp Dynamic weight incl.
Pre-drill Model BA 45 Display for continuous flight auger drilling Effective length – 15.5 m Technical data Drilling drive – torque 45 kNm Drilling drive – speed 95 rpm Max.
High frequency ring vibrator Model 20 VMR Concrete supply system Display for vibrating Effective length – 27 m Technical data Static moment Max. frequency Max.
Hydraulic hammer Model H 50 Effective length – 13.5 m Display for impact driving Technical data Ram mass Max. rated energy Blow rate max. energy Max.
Double rotary drilling Model DBA 80 Hydraulic casing guide Effective length – 12.8 m Display for double rotary drilling Technical data Drilling drive I – torque Drilling drive I – speed Drilling drive I – torque Drilling drive I – speed Drilling drive II – torque Drilling drive II – speed Drilling drive II – torque Drilling drive II – speed Max.
Kelly drilling Model BA 150 and Kelly bar 12/3/20 Shock absorber for Kelly bar Display for Kelly drilling Technical data Drilling drive – torque Drilling drive – speed Drilling drive – torque Drilling drive – speed Technical data Kelly bar 1st gear 1st gear 2nd gear 2nd gear 120 32 60 60 kNm rpm kNm rpm Technical data Kelly winch Line pull (effective) Winch speed *) other Kelly bars on request 12 LRB 125 Diameter Number of sections Extended length Retracted length Drive stub Weight 305 3 20.5 8.
Continuous flight auger drilling Model BA 150 Auger with hydraulic auger cleaner Effective length – 14.6 m Display for continuous flight auger drilling Technical data Drilling drive – torque Drilling drive – speed Drilling drive – torque Drilling drive – speed Max.
Twin mix equipment Model DMA 35 Set up for operation on dams Effective length – 15.2 m Display for soil mixing Technical data Drilling drive – torque Drilling drive – speed Drilling drive – torque Drilling drive – speed 14 LRB 125 1st gear 1st gear 2nd gear 2nd gear 35 60 17.
Process data recording system - PDE® (additional equipment) The Liebherr process data recording system PDE® constantly records the relevant process data during the working process. 59% pile number 10% 12A/23 Ø60cm 3.5 m 3.78 m 4.0 m 4.5 m 5.0 m 5.
LRB 125 – 890058514 – 03/2010 Subject to change without notice. Liebherr-Werk Nenzing GmbH P.O. Box 10, A-6710 Nenzing/Austria Tel.: +43 50809 41-473 Fax: +43 50809 41-499 crawler.crane@liebherr.com www.liebherr.
