Manual

PDE - Process data recording (Additional equipment)
This module constantly calculates and stores the current working processes.
PDE - diagram
Example o f a p rotoco l ( i n r equire d l anguage):
Measurements
Measurements are constantly calculated during the working
process.
No special measuring process is required. External systems can
also be connected to the system.
Display of measurement data
Measurement data relevant to the working process is displayed
on
the monitor in the cab.
The operator can then control the process and, if necessary,
correct
it.
Working process interruption
The w orkin g p roces s a n d t h e m easuremen t c a n b e i nterrupted a t
any
t ime .
The m easurement s a r e a utomaticall y c ontinue d u po n r esumption
of
w ork.
Storage of measurement and
machine data
All data is stored on a memory card. This can be read via a PC.
Thereby an evaluation and processing of data can also be
performed
a t a l ate r t ime . F o r e xample , f or:
D clien t c ertifications
D conveyin
g d ail y p roductio n d ata , d ow n t ime , e tc.
D Soi
l c onditio n r eport
Printing data
A protocol can be printed out from the cab printer after each
working
process.
Data transmission
A GSM modem can be connected to the PDE making long
distance
data transmission possible.
External sensors
Liebherr-W e rk Nenzing GmbH
P.O. Box 10, A-6710 Nenzing/Austria
Tel.: [phone] - 473
Fax: [phone] - 499
[e-mail]
www.liebherr.com
LRB
255 – 102 23 042 – 02/2005 Subject to change without notice.