Assembly and installation instructions

Insert the water filter as far as it will go

with the front knobs in a horizontal position

and turn clockwise until it snaps in.

Route the power cord

towards the electrical outlet.

Route the water line

towards the water shut-off

valve.

Open the door

and remove the

transit support.

Remove the

tapes.

IMPORTANT

Complete the installation

before switching on the

device.

IMPORTANT

The water filter must be installed. Otherwise, the

system may be blocked by dirt.

Apply the appliance cover

strips to the left and right front

edge of the appliance hous-

ing, align in height with the top

profile and screw into place.

The strip is transparent so the

designed mounting holes on

the appliance housing are vis-

ible. We recommend that you

mark and pre-drill the hole

positions in the strip.

Remove the mounting strips, turn them through 180°

and insert them as far as possible into the attachment

bracket.

IMPORTANT

Use the correct flat head screws, otherwise the

edges of the cabinet will be damaged when sliding

the appliance into the recess.

Tx™ 10

nStallatIon