Assembly and installation instructions

The following steps must be carried out simultaneously

for both doors.

Open the appliance doors.

Place the door panels on the upper adjusting bolts and

align them with each other.

Screw the hex nuts onto the adjusting bolts and tighten.

Close the doors and check the

position of the door panels.

IMPORTANT

After a certain time and

load, the doors may have

to be adjusted again.

Torx 15

™

Align the panels hori-

zontally using the long

holes in the attachment

bracket.

Tighten the hex nuts.

Align the panels vertically if neces-

sary.

Align the depth of the

panels.

Loosen the screws, align

the panel and tighten the

screws.

Loosen the hex nuts and

turn the adusting bolts

with the Torx 15 key pro-

vided.

Maximum adjustment: 5/8" (15 mm)

nStallatIon