Assembly and installation instructions

IMPORTANT

After a certain time

and loading, it may be

necessary to readjust

the door again.

Close the door and check the position of the panel.

Open the appliance door.

Place the door panel on the top adjusting bolts and

align in the centre.

Screw the hex nuts onto the adjusting bolts and tighten.

Torx 15

™

Align the panel horizontally with

the long holes in the attachment

bracket.

Tighten the hex nuts.

Align the panel in its vertical

position if necessary.

Torx 25

™

Align the panel in its depth.

Loosen the screws, align the panel

and tighten the screws.

Loosen the hex nuts and turn the

adusting bolts with the Torx 15 key

provided.

nStallatIon