Design Guide
03 04 05
Toe Kicks are " ( mm) high.
58 59
Monolith Accessories
03
Monolith brushed aluminum square handle
Fastening screws are provided. The distance between the two
screw holes is 30 5/16" (770 mm), except for the freezer drawer
of models MCB 3050/3051 which is 24 21/64" (618 mm). Handle
protrudes from panel 1 3/4" (48 mm).
Available for refrigerator columns / freezer columns /
wine columns / refrigerator door of MCB /,
MCB /, MCB / freezer drawer of
MCB /, MCB
(length: /" ( mm), weight: . lbs. (. kg))
Available for freezer drawer of MCB /
(length: /" ( mm)), weight: . lbs. (. kg))
05
Monolith stainless steel round handle
Fastening screws are provided. The distance between the two
screw holes is 30 5/16" (770 mm, except for the freezer drawer
of models MCB 3050/3051 which is 24 21/64" (618 mm). Handle
protrudes from panel 1 3/4" (48 mm).
Available for refrigerator columns / freezer columns /
wine columns / refrigerator door of MCB /,
MCB /, MCB / freezer drawer of
MCB /, MCB
(length: /" ( mm), weight: . lbs. (. kg))
Available for freezer drawer of MCB /
(length: /" ( mm), weight: . lbs. (. kg))
04
Monolith brushed aluminum soft-edge handle
Fastening screws are provided. The distance between the two
screw holes is 30 5/16" (770 mm), except for the freezer drawer
of models MCB 3050/3051 which is 24 21/64" (618 mm). Handle
protrudes from panel 1 3/4" (48 mm).
Available for refrigerator columns / freezer columns /
wine columns / refrigerator door of MCB /,
MCB /, MCB / freezer drawer of
MCB /, MCB
(length: /" ( mm), weight: . lbs. (. kg))
Available for freezer drawer of MCB /
(length: /" ( mm), weight: . lbs. (. kg))
06
Stainless steel Toe Kick
"
"
"
"
"
"
"
"
"
"
07
Side-by-Side kit
The Side-by-Side kit includes a side wall heater to prevent
condensation, metal brackets with screws, and a finishing strip
to fill the gap between the appliances.
Available for all Monolith models
08
Side wall heater
The side wall heater prevents condensation when installing appli-
ances Side-by-Side but in separate niches, and must be used when
having a partition less than 4" (102 mm).
Available for all Monolith models
09
Reverse door kit
The reverse door kit includes the parts needed and instructions to
reverse the door depending on the model from left to right or right
to left. Reversals to be performed by a Liebherr Authorized Dealer.
Available for all Monolith models except MCB