Installation Instructions

Align the panel hori-

zontally with the long

holes in the attach-

ment bracket.

Tighten the hex nuts.

Align the panel in its vertical posi-

tion if necessary.

Align the panel in its

depth.

Loosen the screws,

align the panel and

tighten the screws.

Loosen the hex nuts

and turn the adust-

ing bolts with the

Torx 15 key provided.

Maximum adjustment: 5/8" (15 mm)

Fasten the panel through the bottom attachment brack-

et with two screws 4 x 14.

Align the panel in its depth at the bottom.

Loosen the screws, align the panel and tighten the

screws. Use the Torx 20 key provided.

IMPORTANT

Risk of damaging the panel.

Do not undershoot the minimum panel thickness

(shaker style).

Tx™ 15

nStallatIon