Installation Instructions

Insert the panel supports

into the support strips

between panel and appli-

ance door and screw into

place with two screws

M6 x 12 each.

Tx™ 20

Hook the door cover strips at the

front of the supports and snap in at

the back.

Fasten the panel through the bottom attachment brack-

et with two screws 4 x 14.

Align the panel in its depth at the bottom.

Loosen the screws, align the panel and tighten the

screws. Use the Torx 20 key provided.

IMPORTANT

Risk of damaging the panel.

Do not undershoot the minimum panel thickness

(shaker style).

Tx™ 15

nStallatIon