Spec Sheet
home.liebherr.com/monolith
Subject to modifi cation. For up-to-date information, visit home.liebherr.com/monolith.
Specifi cations are for planning purposes only. For more detailed information refer to installation instructions or Design Guide.
Product Dimensions
Individual Toe Kick
Cut out Dimensions
Door Panel Dimensions
and dimensions of free length for power
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
Continuous Toe Kick
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
3/4" (19 mm) by turning the adjustable feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top has
contact with the anti-tipping bracket. This
results in a 4” (102 mm) Toe Kick height.
Width will increase by 1/4" (6.5 mm) when
mounting strips are installed.
A
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet depth inset installation style = 25" (635 mm) +
panel thickness
B
At this point the power cord exits from the appliance
rear. 3/4" (19 mm) from the left and 5" (127 mm) from
the floor. Free length of the power cord is 98" (2.5 m).
C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2" (140 mm)
in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
E
The anti-tipping bracket is positioned at the base of
the appliance and must be secured to the wall or to the
floor, please refer to the installation manual for more
information.
Inset
A = 13 1/4" (337 mm)
B = 1/2" (12.5 mm)
C = 31 7/8" (810 mm)
Frameless
A = 13 1/2" (343 mm)
B = 1/2" (12.5 mm)
C = 32 3/8" (822 mm)
D = 15 3/4" (400 mm)
Dimension A = without
mounted door handle
30" recess
Inset installation style
H1 = 49 3/8" (1255 mm)
H2 = 30 1/4" (768 mm)
HS = 1/4" (6 mm)
W = 29 3/4" (756 mm)
Frameless installation style
H1 = 49 1/2" (1258 mm)
Add overlapping dimension to
the panel on the top.
H2 = 30 1/4" (768 mm)
HS = 1/4" (6 mm)
W = 30" (762 mm)
Add overlapping dimension to
the panel on both sides.
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight 1: Max. 77 lbs. (35 kg)
Panel and handle weight 2: Max. 55 lbs. (25 kg)
(2126 mm)
3
83 /4"
(65 mm)
9
2 /16"
(96 mm)
3
3 /4"
(610 mm)
24"
(754 mm)
11
29 /16"
C
↑
↓
30″
4"
(102 mm)
30"
(762 mm)
A
B
13 3
2
/16" - 4
/16"
(72 - 106 mm)
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E
3"
(76 mm)
30"
(762 mm)
A
B
3"
(76 mm)
DD
84"
(2134 mm)
C
E
84"
(2134 mm)
4"
(102 mm)
36"
(914 mm)
A
B
13 3
2 /16" - 4
/16"
(72 - 106 mm)
3"
(76 mm)
3"
(76 mm)
DD
C
E
84"
(2134 mm)
36"
(914 mm)
A
B
3"
(76 mm)
3"
(76 mm)
DD
C
E
W
H 1
H 2
HS
~
8.8 ft (2400 mm)
~
5 ft (1550 mm)
Inset
A = 15 3/4" (400 mm)
B = 1/2" (12.5 mm)
C = 37 7/8" (962 mm)
Frameless
A = 16" (406 mm)
B = 1/2" (12.5 mm)
C = 38 3/8" (975 mm)
D = 15 3/4" (400 mm)
Dimension A = without
mounted door handle
1
2
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
C
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight 1: Max. 77 lbs. (35 kg)
Panel and handle weight 2: Max. 55 lbs. (25 kg)
1
2
with left door hinges
InfinitySwipe
automatic
InfinityLight
InfinitySpring
yes
fixed water connection
right, reversible **
29
11
/
16
" (754 mm)