Use and Care Manual For Fully Integrated NoFrost Combined Refrigerator-Freezers MCB 94.. / MCB 96..
Table of Table of Contents Contents Page Please Read and Follow these Instructions.................. 2 California Proposition 65................................................ 3 Disposal of Old Appliance.............................................. 3 Disposal of this Appliance.............................................. 3 Disposal of Packaging Material...................................... 3 Important Safety Information.......................................... 4 R600a Refrigerant...................
Safety California Proposition 65 Disposal of this Appliance - This product contains chemicals known to the state of California to cause cancer or reproductive harm. This appliance contains flammable gases within the refrigeration circuit and insulation foam. - This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Safety Important Safety Information • WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. • WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • WARNING: Do not damage the refrigerant circuit. • WARNING: The power cord must not be damaged while installing the appliance.
Safety R600a Refrigerant • Any repairs and work on the appliance should only be performed by the customer service department or other trained personnel. The same applies to changing the power cord. WARNING The refrigerant R600a contained within the appliance is environmentally friendly, but flammable. Leaking refrigerant can ignite. • Only perform repair and other work on the appliance when the plug has visibly been disconnected.
Safety Electrical Safety Safety Regulations Connect this appliance to a 15 amp or 20 amp, 110120 VAC, circuit which is grounded and protected by a circuit breaker or fuse. This appliance is intended to be used in household and similar applications. We recommend using a dedicated circuit for this appliance to prevent circuit overload and the chance of interruption to the appliance.
Features Description of the Appliance MCB 3050 MCB 3650 1 MCB 3652 1 2 1 2 7 2 7 7 7 3 6 8 3 9 4a 8 3 6 8 3 9 4b 5 5 4a 3 6 9 4b 5 5 5 8 3 4a 4b 5 (1) Control panel (2) Air filter (3) Adjustable shelves (max. 44 lbs (20 kg)) (4a/b) BioFresh-Plus drawer. For storing food at a temperature of either 32°F or 28°F. (5) Adjustable-height feet (6) Water dispenser (7) Adjustable door rack (8) Gallon rack MCB 3000 (max. 55 lbs (25 kg)) MCB 3650 (max.
Operation Control Panel Switching the Appliance On Three different actions to operate the control panel. Touch Touch Touch to activate functions. Slide to your language and touch Press Press for approx. 2 seconds to activate functions. Available languages: • German • Portuguese (Brazil) • French • Spanish • Italian • English (GB) • English (US) • Chinese • Russian Slide to the desired temperature unit and touch Slide Slide to right or left to navigate in the menu or to search for values.
Operation Main Menu Slide through the main menu. The following functions are available. Refrigerator compartment temperature display and temperature setting. Switching the appliance on or off. BioFresh-Plus compartment temperature display and temperature setting. Describes how to change the filters and clean the water dispenser and dust filter. Freezer compartment temperature display and temperature setting.
Operation Setting the Temperature (Refrigerator Compartment) Setting the Temperature Standard setting is 38°F. Slide to the required zone. Touch Touch or Slide to the desired target temperature and touch or The number flashing at the bottom right shows the actual interior temperature. It disappears when the target temperature is reached. Close the appliance door. IMPORTANT The temperature in the warmest section of the appliance may be higher than the set value.
Operation Setting the Temperature (Freezer Compartment) Setting the Temperature (BioFresh-Plus Compartment) Standard setting is 0°F. Standard setting is 32°F. Touch Slide to the desired target temperature and touch Touch Slide to the desired target temperature and touch or The number flashing at the bottom right shows the actual interior temperature. It disappears when the target temperature is reached. or Close the appliance door. Display when the door is opened again.
Operation SuperCool Activate SuperCool if you wish to cool large quantities of food rapidly. The set temperature is 36°F. Touch Attach the holder at the top (1) and turn it (2). SuperCool is activated. At top right, the remaining run time of 6 hours is visible. When this time is up, the appliance switches back to normal operation. Close the appliance door. Insert the drawer divider. Display when the door is opened again. To change the temperature, SuperCool must be deactivated. Touch the display.
Operation SuperFrost Freezing and Storage Fresh food should be frozen completely and as rapidly as possible. This is provided by the SuperFrost feature and ensures that the nutritional value, appearance and flavor of the food remains intact. • Pack frozen food in standard freezer bags or reusable plastic, metal or aluminum containers. Touch SuperFrost is activated. Wait 24 hours. Then place the food inside and close the appliance door. Display when the door is opened again.
Operation Safety Instructions and Warnings for the Ice Maker Switching the IceMaker on • The ice maker is designed exclusively to make ice cubes in quantities needed by a household. • All repairs and work on the ice maker may only be done by customer service personnel or other appropriately trained personnel. Touch • Do not consume or use the first three batches of ice. This applies both to using the appliance for the first time and also using it after it has not been used for a long period of time.
Operation Switching the Ice Maker Off Switching the IceMaker to Maximum Ice Production IMPORTANT Additional steps required to decommission the appliance or for a lengthy absence. Touch • Switch off the water supply. • Wait for 24 hours or until the water alarm appears. • Disable the ice maker. Touch Slide to the left. Touch Slide to the right. IMPORTANT The temperature in the freezer compartment is set to the perfect level for ice production. Touch The MaxIce function is activated.
Operation PartyMode HolidayMode When a large amount of cold food or beverages is needed: Place all the food and beverages in the appliance one day before and activate PartyMode. SuperCool is activated in the refrigerator compartment and maximum ice production in the freezer compartment. Before a lengthy absence, use up all the food in the refrigerator compartment and activate HolidayMode. This ensures that no unpleasant odors develop inside the appliance, even if the appliance door is closed.
Operation SabbathMode Switching the Appliance Off When SabbathMode is active, some functions of the electronic features are switched off to comply with STAR-K Kosher Certification. • The lighting remains off. • The cooling fan remains in its actual state: If it is on, it remains on, if it is off, it remains off. • There is no door alarm. • There is no temperature alarm. • Defrost cycles are independent of the number of times and length of door openings.
Operation Maintenance Message Maintenance Confirmation In regular intervals of operation of the appliance, the maintenance message comes on (6 months). Filters need to be changed. The water disperser needs to be flushed. The dust filter needs to be cleaned. Touch Touch Touch or Change water filter and air filter as described in chapter „Maintenance“. Subsequently press to continue. Flush water dispenser as described in chapter „Maintenance“. or Touch Close the appliance door.
Operation Setup Menu Includes the adjustment for display brightness, language, units, activation of the SmartDeviceBox and the device information. Touch Display shows the device information. Slide to the right. Slide to the left. Touch to exit. Slide to the left. Slide to the left. Slide to the left. (Only visible when the SmartDeviceBox is fitted.) Slide to the left.
Operation Display Brightness Touch Touch Touch Slide to your language and touch 100% = maximum brightness. 25% = lowest brightness. Slide to the desired value and touch. 20 Language Available languages: • German • Portuguese (Brazil) • French • Spanish • Italian • English (GB) • English (US) • Chinese • Russian Slide to the left. Slide twice to the left. Touch to exit. Touch to exit.
Operation Units Touch SmartDeviceBox (Not Supplied in All Countries) The appliance is ready for integration into a smart home and for extended services. Other options can be selected with a SmartDeviceBox. This is activated via the MyLiebherr customer portal. Slide to the desired temperature unit and touch You will find more information about availability and prerequisites and the individual options on the website www.smartdevice.liebherr.com/info. Download the “SmartDevice App” to your smartphone.
Operation Description of the SmartDevice Displays Alarm Messages Door Open Alarm SmartDeviceBox is inserted. Door has been left open for longer than about 180 seconds. Display to start the WLAN connection. Action Close the appliance door. Electronic Fault Alarm The symbol flashes. Connection to WLAN is in progress. The router credentials are displayed. Electronic fault. Touch Action Contact service, stating the failure code displayed. Touch Appliance is connected to WLAN.
Operation Temperature Alarm Power Alarm Touch Touch The inside temperature was too high. Touch The power supply was interrupted. Touch If the interior temperature was too high: Touch Action Check the quality of the stored food. Touch The alarm display disappears as soon as the set temperature is reached. Touch Water alarm Touch No water in the system. Action Check the quality of the stored items in the appliance. The alarm display will go out as soon as the set temperature has been reached.
Operation Ice Maker Alarm Connection Failure Touch Action Contact service, stating the failure code displayed. Touch Touch Failure XX0000 Please contact service. IceMaker is off IceMaker failure Action Contact service, stating the failure code displayed. Touch The ice maker is disabled. There is no need to move any items to another appliance. The connection is disabled. There is no need to move any items to another appliance.
Equipment Equipment You can rearrange the height of the shelves and door racks as required. CAU T I O N ! Risk of injury and damage. Do not attempt to adjust a shelf or door rack with food on it. Only adjust an empty shelf or door rack. Repositioning the shelves Removing Lift the shelf up and move out toward you. Gallon rack bottle holder You can protect the bottles from falling over when the door is opened and closed. Move the bottle holder to the desired position. Always hold at the front when moving.
BioFresh-Plus Compartment Water Dispenser BioFresh-Plus Compartment Press a drinking glass against the bottom part of the dispenser. The top part moves out and the water flows into the glass. waiting (max. time 2 min time before reuse 4 min) Set the temperature of the BioFresh-Plus compartment in accordance with the type of stored food. See chapter „Setting the Temperature (BioFresh-Plus Compartment)“. Set to 32°F (factory setting) for storing fruit, vegetables, meat, cold meats or dairy products.
Cleaning Cleaning • Clean the inside of the appliance and equipment parts with lukewarm water and a little detergent. WARNING! • To prevent possible injury due to an electric shock, be sure to disconnect the power cord or turn off the circuit breaker before cleaning the appliance. • To avoid injury or damage, do not use steam cleaning equipment to clean the appliance. • To avoid short-circuits, ensure no cleaning water penetrates into the electrical components when cleaning the appliance.
Maintenance Maintenance Menu Maintenance can be carried out independently of the specified regular intervals. The maintenace menu includes the following steps. Complete cleaning For complete maintenance of the appliance. Dispenser cleaning To interrupt the water supply for cleaning the dispenser outlet. New water filter To flush and reset maintenance timer. New air filter To reset maintenance timer.
Maintenance Maintenance New water filter The inserted water filter absorbs deposits in the water and reduces the taste of chlorine. IMPORTANT To avoid reduction of the water flow rate of the dispenser, the water filter should be changed at least at the indicated maintenance intervals. If noticeable water flow reduction occurs, the water filter should be changed sooner. Note It is not necessary to turn off the water supply when removing or inserting the filter. Remove the ventilation grille.
Maintenance Dispenser cleaning The dispenser outlet and the surrounding area can be cleaned without disconnecting the appliance from the electrical power supply. Touch Touch Press for approx. 2 seconds Message The water supply is stopped now. Press for approx. 2 seconds • Press in the bottom part of the dispenser so that the top part moves out. • Clean the water outlet and the surrounding area. Flush approx. 1.5 quarts of water through the dispenser and discard.
Maintenance New air filter The air filter absorbs odors from the appliance interior. It should be changed at least at the indicated maintenance intervals. Touch Insert the cover and turn clockwise until it snaps in. Message Press for approx. 2 seconds The maintenance timer for air filter change is reset. Slide two times to the left. Turn the cover counterclockwise and remove. Touch to exit. Turn the air filter counterclockwise and remove. Insert the new air filter and turn clockwise until it snaps in.
Maintenance Flush cleaning When the water dispenser has not been used for one week or more, flush the pipeline. Cleaning the Dust Filter Clean the dust filter in the toe kick area in at least the specified maintenance intervals. Touch Remove the ventilation grille. Message Flush approx. 1.5 quarts of water through the dispenser and discard. Clean the dust filter using a vacuum cleaner. Press for approx. 2 seconds Slide to the left. Fit the ventilation grille. Touch to exit.
Additional Functions Additional Functions BioFresh temperature adjustment BioFresh-Plus temperature adjustment Water pressure adjustment Heating control (MCB 3652 only) Activating the defrost function manually Reset to factory setting DemoMode Touch BioFresh temperature adjustment (Right-hand Side of the Drawer) The temperature in the drawer is kept at a constant value of around 32°F. It can be adjusted to slightly warmer or colder.
Additional Functions Slide to the right to Touch Touch at the desired value. Slide to the right. Touch to exit. Slide to the right to Touch BioFresh-Plus temperature adjustment (Left-hand Side of the Drawer) The temperature in the drawer can be set to 32°F or 28°F. Both fixed temperature settings can be adjusted respectively to slightly warmer or colder. Slide to the right. IMPORTANT Do not increase or reduce it by more than one step.
Additional Functions Water pressure If the ice cubes produced by the ice maker are too small (the first few batches are always smaller), the inflowing water quantity can be adjusted. Heating control (MCB 3652 only) If condensation forms on the seal on the refrigerator doors, this can be rectified by activating the seal heating system. Touch Touch Slide to the left or right Touch E4 for smaller ice cubes Touch E6 for larger ice cubes Touch at the desired value.
Additional Functions Manual defrost The appliance defrosts automatically. The defrost function can be activated manually for service applications. Freezer Compartment 36 Refrigerator Compartment Touch Touch The appliance switches back to normal operation when the evaporator is defrosted. The appliance switches back to normal operation when the evaporator is defrosted. Slide to the right to Touch Slide to the right to Touch Slide twice to the right. Slide twice to the right. Touch to exit.
Additional Functions Reset The electronic control can be reset to factory settings using this function. Touch DemoMode DemoMode can be activated for presenting the appliance at exhibitions or in showrooms as if it were in normal operating mode. Activating DemoMode Touch Press for approx. 2 seconds DemoMode is activated. The cooling circuit is switched off! Slide to your language and touch Slide to the desired temperature unit and touch Touch The appliance is in normal operation.
Additional Functions Deactivating DemoMode Touch Slide to the right. Press for approx. 2 seconds Slide to left or right. Enter code 151. Press for approx. 2 seconds DemoMode is deactivated.
Troubleshooting Troubleshooting If a problem occurs during operation, check whether it is due to an operating error. Please note that even during the warranty period, some repair costs may be your responsibility. You may be able to correct the following faults by checking the possible causes yourself: Problem Possible Cause and Remedy Appliance does not work, display is off.
For Service in the U.S. Liebherr Service Center Toll Free: 1-866-LIEBHER or 1-866-543-2437 Email: Service-appliances.us@liebherr.com PlusOne Solutions, Inc. 3501 Quadrangle Blvd, Suite 120 Orlando, FL 32817 For Service in Canada Liebherr Service Center Toll Free: 1-888-LIEBHER or 1-888-543-2437 www.euro-parts.ca EURO-PARTS CANADA 39822 Belgrave Road Belgrave, Ontario, N0G 1E0 Phone: (519) 357-3320 Fax: (519) 357-1326 *708040200* w w w. l i e b h e r r - a p p l i a n c e s .
