Assembly and installation instructions

Open the appliance door.
Unscrew the attachment bracket with the mounting strip.
IMPORTANT
As you remove them, ensure that the mounting
strips do not move.
IMPORTANT
Now install the door handles as the attachment
bracket will cover the mounting holes.
Only use countersunk screws for handle mounting.
The holes should be countersunk.
The screw heads should be flush with the panel.
IMPORTANT
Risk of damaging the panel.
Do not undershoot the minimum panel thickness
(shaker style).
Position the attachment
bracket in the middle of the
door panel, align horizontally
and secure to the door panel
using eight 4 x 14 screws.
Tx™ 15
IMPORTANT
Risk of damaging the panel.
Do not undershoot the minimum panel thickness
(shaker style).
Position the panel support strips
with the top lug in the cut of the
top attachment bracket.
Align the panel support strips par-
allel to the side edge of the panel
and screw into place with eight
4 x 14 screws.
Tx™ 15
Mount the base of the ventilation
duct divider with two screws 4 x
19.
Click on the cover.
Tx™ 15
29
I nStallatIon