Installation Guide

2. Press in the lug, tear
or cut the carton on
the edge and remove
it.
Unpacking
1. Cut the straps and
remove them.
3. Remove all styrofoam packing
material from the sides and
top.
4. Remove the box with
mounting parts.
6. Secure the appliance door with
tape to prevent it from being
opened accidentally.
7. Remove the rear transporta-
tion safety components and
anti-tipping device.
Remove the packed cover
strips and support strips from
the appliance rear.
WARNING!
Risk of injury and damage.
Fourpeoplearerequiredtosafelyremove
the appliance from the bottom pallet.
8. One person tilts the appliance
back carefully and holds it in place.
9. Two people grasp the appli-
ance from the bottom and
lift. One on each side.
10. One person removes the pallet.
Place the appliance carefully on the floor.
5. Remove the ventila-
tion grille.
DANGER!
Risk of death or serious injury due to
appliance tipping.
Do not remove the transit supports before
the appliance is in the recess.
Tx™ 20
Tx™ 20
anti tipping device
9
U npackIng
MW 18.. MW 24..