Assembly and installation instructions

Appliance Installation

Move the appliance towards the final position and leave

enough space to work behind.

Route the power cord

towards the electrical outlet.

Open the door and

remove the transit

support.

Remove the tapes.

Apply the appliance cover strips to

the left and right front edge of the

appliance housing, align in height

with the top profile and screw into

place. The strip is transparent so

the designed mounting holes on

the appliance housing are visible.

We recommend that you mark and

pre-drill the hole positions in the

strip.

IMPORTANT

Use the correct flat head screws, otherwise the

edges of the cabinet will be damaged when sliding

the appliance into the recess.

Fit the door stops.

Mounting the depth adjustment aid into the cover strips

lockIng

for

afety

IMPORTANT

Complete the installation

before switching on the

device.

Tx™ 10