Manualshelf

Assembly and installation instructions

ManualsBrandsLiebherr ManualsAppliancesLiebherr 24" Monolith Custom Frame Right-Hinge Built-In Triple Zone Wine Cabinet
11121314151617181920
Fasten the panel through the bottom attachment brack-
et with two screws 4 x 14.
Align the panel in its depth at the bottom.
Loosen the screws, align the panel and tighten the
screws. Use the Torx 20 key provided.
19
I
nStallatIon
Tx™ 15
IMPORTANT
For installation, only pull out the magnetic seal at
one of the marked screw positions (there are 9
on each side 200 mm apart). Never remove the
magnetic seal in full.
Tx™ 15