Design Guide

3938
18" Monolith Wine
Available Accessories
· Stainless steel door panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
· Reverse door kit
See pages 42–43 for available accessories
for single units and Side-by-Side combinations.
* Noise output – according to EN 60704-3.
** Please contact your Liebherr Authorized Dealer for door reversal.
IMPORTANT!
Stated minimum height dimensions include
when the leveled feet are fully inserted.
Height can be increased by a maximum of
1" (26 mm) by turning the adjust able feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Product Dimensions
MW 1801
A
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet depth inset installation style = 25" (635 mm) +
panel thickness
B
At this point the power cord exits from the appliance rear.
3/4" (19 mm) from the left and 5" (127 mm) from the
floor. Free length of the power cord is 98" (2.5 m).
C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2"
(140 mm) in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
E
The anti-tipping bracket is positioned at the base of the
appliance and must be secured to the wall or to the floor,
please refer to the installation manual for more information.
18" recess
Inset installation style
H = 79 7/8" (2029 mm) / h = 58 7/8" (1495 mm)
W = 17 3/4" (451 mm) / w = 11" (280 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 18" (457 mm) Add overlapping
dimension to the panel on both sides.
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight: Max. 52 lbs. (24 kg)
Individual Toe Kick
Cut out Dimensions
Door Panel Dimensions
and dimensions of free length for power
Continuous Toe Kick
4"
(102 mm)
18"
(457 mm)
A
B
13 3
2 /16" - 4
/16
"
(72 - 106 mm)
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E
18"
(457 mm)
A
B
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
C
18 "
(2126 mm)
3
83 /4"
(65 mm)
9
2 /16"
(96 mm)
3
3 /4"
(610 mm)
24"
(450 mm)
3
17 /4"
Inset
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 19 7/8" (505 mm)
Frameless
A = 8 1/2" (216 mm)
B = 1/2" (12.5 mm)
C = 20 3/8" (517 mm)
Dimension A = without
mounted door handle
W
Hh
w
~
8.8 ft (2400 mm)
~
6.5 ft (2000 mm)
38 *
8.2 (232)
75
9
9
aluminum / beech
yes
InfinitySwipe
+41°F to +68°F (+5°C to +20°C)
2
visual and acoustic
InfinityLight
acoustic
yes
yes
insulated glass door
left, reversible **
83 3/4" / 17 3/4" / 24"
212.6 / 45 / 61
84" / 18" / 25"
213.4 / 45.7 / 63.5
295.4 (134)
115/60
with right door hinges
Sound rating dB(A)
Total capacity cu.ft. (l)
Max. No. of Bordeaux bottles (0.75l)
Number of shelves
Shelves on telescopic rails
Shelf material
Infi nityBoard
Electronic control
Temperature range °F (°C)
Temperature zones
Temperature alarm
Interior light
Door alarm
Safety thermostat
Activated Charcoal fi lter
Door type
Door hinges
Product dimensions
in inch (H/W/D)
in cm (H/W/D)
Cut out dimensions
in inch (H/W/D)
in cm (H/W/D)
Net weight lbs. (kg)
Voltage V/Hz
This unit is also available as MW 1800:
17
3
/
4" (450 mm)