Installation Guide

IMPORTANT

Door handles should be mounted now because the

side support strips will cover the mounting holes.

Only use countersunk

screws for handle mount-

ing.

The holes should be coun-

tersunk.

The screw heads should be

flush with the panel.

Remove the attachment bracket from the door. Nuts are

required again later.

Fit the attachment bracket on the panel.

Affix the sealing strip to the bottom inside of

the panel.

Tx™ 15

Fit the divider for the ventilation

duct using two screws 4 x 19.

Fit cover.

Tx™ 15

nStallatIon