Operating instructions
10
s
eTTing
up
Setting Up
The appliance is intended for out door use.
It is recommended to install the appliance in a shel-
tered area, avoiding direct contact with extreme
weather.
Avoid placing the appliance in direct sunlight or near
the stove, range top, radiators and similar heat sources.
The appliance is designed for a freestanding setting up.
The appliance is not intended for built-in applications.
As soon as you uncrate the unit:
• Examinetheunitandpackagingforshippingdam-
age. Contact the carrier immediately if you suspect
there is any damage.
• Notethetype(modelnumber),servicenumber,
appliance / serial number, date of purchase and
where purchased in the space provided in the back
of this manual.
Appliance Dimensions
Height when adjustable feet have been screwed in
as far as they will go.
Maximum height adjustment = 2" (51 mm)
Turn the wrench counterclockwise to raise the appli-
ance and clockwise to lower it. Position the wrench
accordingly.
IMPORTANT
The appliance must be aligned horizontally and
vertically. If the appliance is not level, the main
body of the appliance can become deformed
and the door will not close properly.
Leveling the Appliance
• Placetheapplianceinits
final position at the place of
installation.
• Compensateflooruneven-
ness using the adjustable
feet.