Installation instructions Side-by-Side combinations 20190604 7088146 - 00 SBS(es/bs)
General safety information Contents 1 General safety information................................... 2 2 External dimensions of the appliance................. 2 3 Side-by-side assembly.......................................... 2 2 External dimensions of the appliance The manufacturer works constantly on the further development of all the types and models. Therefore please understand that we have to reserve the right to make design, equipment and technical modifications.
Side-by-side assembly Fig. 2 Fitting parts, supplied in the appliance. Fig. 5 u Tighten the outer adjustment feet. The appliances can be moved easier u Push both appliances together up to approx. 10 mm apart so that they stand flush at the front. u Line the appliances up with a spirit level on the top of the appliance. Top front of the appliance: Fig. 3 Fig.
Side-by-side assembly u Slide the bracket Fig. 10 (8) on with the slots over the retainer for the wall spacers. u Mark the position of the holes to be drilled with a pencil. u Remove the bracket again. Fig. 8 u Remove the existing covers. u Slide the bracket Fig. 8 (6) on with the spacer between the appliances and screw in loosely with the 4 screws Fig. 8 (4). u If necessary line the appliances up again. u Now tighten the screws firmly at the top and bottom. Top back of the appliance: Fig.
Side-by-side assembly u Connect the appliance to the fixed water connection according to the manual. NOTICE Risk of damage when moving the combined SBS appliance! The combined SBS appliance is heavy once assembled. The appliance may be dented by improper movement. u Observe the information given on moving the appliance (see above). Fig. 13 u On the top press the short cover strip Fig. 13 (9) into the horizontal gap. u Carefully slide the combination into the intended position.
Liebherr-Hausgeräte Ochsenhausen GmbH Memminger Straße 77-79 88416 Ochsenhausen Deutschland home.liebherr.
