Operating and installation instructions Upright refrigerator 281013 7085582 - 01 SKes/Sk/K/Kes 36...42 ...
Appliance at a glance Contents 1 1.1 1.2 1.3 1.4 1.5 1.6 Appliance at a glance............................................ Description of appliance and equipment.................. Range of appliance use............................................ Conformity................................................................ External dimensions of the appliance....................... Saving energy.......................................................... HomeDialog...............................................
Appliance at a glance substances and products covered by the 1.4 External dimensions of the appli2007/47/EC Medical Devices Directive. Misuse ance of the appliance can result in the stored products suffering harm or perishing. Furthermore, the appliance is not suitable for operation in potentially explosive atmospheres. The appliance is set to operate within specific ambient temperature limits according to its climate rating. The correct climate rating for your appliance is indicated on the type plate.
General safety information 1.6 HomeDialog Depending on model and options, the HomeDialog system can be used to network a number of Liebherr appliances (situated, for example, in the basement) with a main appliance (sited, for example, in the kitchen) and control them via the latter. You will find more information on the benefits, requirements and principle of operation on the internet at www. liebherr.com.
Controls and displays 3 Controls and displays 3.1 Operating and control elements (1) (2) (3) (4) (5) (6) (7) Alarm button SuperCool button On/Off button Alarm symbol Menu symbol Down setting button Up setting button Fig. 3 (8) Fan button (9) Temperature display (10) Fan symbol (11) Child-proofing symbol (12) SuperCool symbol (13) HomeDialog symbol 3.2 Temperature display The following are displayed in normal operation: - the average cooling temperature The following displays indicate malfunction.
Putting into operation u In the case of an appliance with enclosed wall spacers, mount the wall spacers on the back of the appliance at the top left and right. u Dispose of packaging material (see 4.5) . u Align the appliance so that it stands firmly and on a level by applying the accompanying spanner to the adjustableheight feet (A) and using a spirit level. u Then support the door: Extend the adjustable foot at the turn hinge (B) until it rests on the floor and then make a further 90° turn.
Putting into operation u Unscrew Fig. 6 (29)the bearing element Fig. 6 (28) transfer it to the opposite location hole of the turn hinge and screw it firmly into place. u Re-insert the stopper Fig. 6 (21) into the other hole. u Carefully lift off the cover on the handle side Fig. 6 (27) and transfer it to the opposite side. u Screw the turn hinge Fig. 6 (25) firmly into place on the new hinge side, possibly using a cordless screwdriver (with 4 Nm). u Re-insert the bearing pin Fig.
Control 4.5 Disposing of packaging WARNING Risk of injury due to the door dropping out! If the bearing parts are not screwed into place firmly enough, the door may drop out. This may lead to severe injuries. What is more, the door may not close and therefore the appliance may fail to cool properly. u Screw the turn hinges firmly into place with 4 Nm. u Check all of the screws and retighten if necessary. 4.
Control u To activate the setting mode: press SuperCool button Fig. 3 (2) for about 5s. w The display indicates c. w The menu symbol Fig. 3 (5) shines. u Using the Up setting button Fig. 3 (7) and Down setting button Fig. 3 (6), select h. u To confirm: briefly press the SuperCool button Fig. 3 (2). u To set the display brighter: press the Up setting button Fig. 3 (7). u To set the display darker: press the Down setting button Fig. 3 (6). u To confirm: briefly press the SuperCool button Fig. 3 (2).
Control 5.7 Fan 5.10 Door racks With the fan you can rapidly cool large quantities of fresh food or achieve a relatively even distribution of temperature across all the storage levels. 5.10.1 Moving the storage rack u Remove storage rack according to illustration. The forced-air cooling is to be recommended: - at high room temperature (above33 °C ) - at high humidity The forced-air cooling uses slightly more energy. To save energy, the fan switches off automatically when the door is open. 5.7.
Maintenance 5.12 Vegetable bins NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product. Fig. 12 To remove the vegetable bins: u pull the vegetable bin all the way out and tilt it forwards a little. w In the case of the bottom drawer, the drawer locking device is additionally released and the vegetable bin can be removed. u Push the projecting telescopic slides back in. Otherwise the surface coating will be affected.
Malfunction u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse. 7 Malfunction Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself: Appliance does not work.
Disposing of the appliance 9 Disposing of the appliance The appliance contains some reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.
Disposing of the appliance 14 * Depending on model and options