Operating and installation instructions Upright refrigerator 060217 7086440 - 00 SK(ef) 4260 ...
Appliance at a glance Contents 1 1.1 1.2 1.3 1.4 1.5 Appliance at a glance............................................ Description of appliance and equipment.................. Appliance range of use............................................. Conformity................................................................ External dimensions of the appliance....................... Saving energy.......................................................... 2 2 2 3 3 3 2 General safety information.................
General safety information Misusing the appliance may lead to damage to the goods stored or they may spoil. Climate classifications Depending on the climate classification the appliance is designed to operate in restricted ambient temperatures. The climate classification applying to your appliance is printed on the rating plate. Note uKeep to the specified ambient temperatures in order to guarantee that the appliance works properly.
Controls and displays - Please keep these instructions in a safe place and pass them on to any subsequent owners. - Special-purpose lamps (incandescent lamps, LEDs, fluorescent tubes) in the appliance serve to illuminate the appliance interior and are not suited for room illumination. Fire hazard: - The refrigerant R 600a is environmentally friendly but flammable. Escaping refrigerant may ignite. • Do not damage the refrigerant circuit pipes.
Putting into operation 4 Putting into operation 4.1 Transporting the appliance CAUTION Risk of injury and danger of damage as a result of incorrect transport! u Transport the appliance in a packed condition. u Transport the appliance upright. u Do not transport the appliance without assistance. 4.2 Installing the appliance q The more R 600a refrigerant there is in the appliance, the larger the room in which the appliance is standing needs to be.
Putting into operation 4.3 Changing over the door hinges 4.3.2 Changing the bearing parts You can change over the door hinges if necessary. NOTICE Risk of damage to side-by-side appliances due to condensation! When a side-by-side appliance (S…) is fitted together with a second appliance (as a SBS combination), the door hinges must remain as delivered. u Do not change over the door hinges.
Putting into operation 4.4 Insertion into a row of kitchen units Fig. 7 u Lift the stopper (33) out of the door bearing bush and transfer it. u Dismantle the door handle (32), stoppers (33) and pressure plates* (34) and transfer to the opposite side. u When fitting the pressure plates on the opposite side, make sure they snap properly into place.* 4.3.4 Fitting the door u Place the door from above onto the lower bearing pin Fig. 5 (22). u Close the door.
Control 4.6 Connecting the appliance 5.2 Child proofing NOTICE The child-proofing function enables you to make sure that the appliance is not inadvertently switched off by playing children. Failure to connect properly Damage to the electronics. u Do not use a standalone inverter. u Do not use an energy saving plug. WARNING Failure to connect properly Fire. u Do not use an extension cable. u Do not use distributor blocks.
Control 5.5 Food refrigeration w SuperCool is deactivated. Note The energy consumption increases and the cooling performance decreases if the ventilation is inadequate. u Always keep the air slits of the fan free. 5.8 Fan u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and preserves in the upper area and in the door (see Appliance at a glance). u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping.
Maintenance 5.10 Using the sectioned shelf u pull the vegetable bin all the way out and tilt it forwards a little. w In the case of the bottom drawer, the drawer locking device is additionally released and the vegetable bin can be removed. u Push the projecting telescopic slides back in. Fig. 11 u The glass shelf with stop face (2) has to be at the back. 5.11 Door racks 5.11.1 Moving the storage rack Fig.
Malfunctions NOTICE Risk of damage from stainless steel care products! The stainless steel doors and stainless steel side panels are treated with a premium surface finish. Stainless steel care products attack these surfaces. u Only use a soft, clean cloth to wipe down finished door and side panel surfaces and painted door and side panel surfaces. To remove heavy dirt, use a little water or neutral detergent. Alternatively, you can use a micro-fibre cloth.
Decommissioning The outer surfaces of the appliance are warm*. → The heat of the refrigeration circuit is used to prevent condensate from forming. u This is normal. The temperature is not cold enough. → The door of the appliance is not properly closed. u Close the door of the appliance. → Insufficient ventilation. u Keep ventilation grille clear, and clean it. → The ambient temperature is too high. u Solution: (see 1.2) . → The appliance was opened too frequently or for too long.
Disposing of the appliance * Depending on model and options 13
Liebherr-Hausgeräte Ochsenhausen GmbH Memminger Straße 77-79 88416 Ochsenhausen Deutschland home.liebherr.