Operating instructions

Risk of crushing:
-
Do not hold onto the hinge when opening and
closing the door. Fingers may get caught.
California Proposition 65
-
This product contains chemicals known to the
state of California to cause cancer or repro-
ductive harm.
-
This product can expose you to chemicals
including Diisononyl Phthalate (DINP) which
is known to the State of California to
cause cancer. For more information go to
www.P65Warnings.ca.gov.
-
This product can expose you to chemicals
including Di-isodecyl Phthalate (DIDP) which
is known to the State of California to cause
birth defects or other reproductive harm.
For more information go to www.P65Warn-
ings.ca.gov.
Symbols on the device:
The symbol can be on the compressor.
It refers to the oil in the compressor and
refers to the following danger: Can be
lethal if swallowed or inhaled. This notice
only applies for recycling. There is no
danger during normal operation.
The symbol is located on the compressor
and indicates the danger of inflammable
materials. Do not remove the label.
This label or a similar one can be located
on the rear of the appliance. It refers to
the foamed-in panels in the door and/or
the housing. This notice only applies for
recycling. Do not remove the label.
Follow the specific instructions in the other
sections:
DANGER indicates a hazardous situation,
which if not avoided, will result in
death or serious injury.
WARNING indicates a hazardous situation,
which if not avoided, could result
in death or serious injury.
CAUTION indicates a hazardous situation,
which if not avoided, will result in
minor or moderate injury.
NOTICE indicates a hazardous situation,
which if not avoided, could result
in damage to property.
Note indicates useful advice and tips
3 Controls and displays
3.1 Operating and control elements
Fig. 2
(1) On/Off button (9) Fahrenheit symbol
(2) SuperFrost button (10)Child safety symbol
(3) Up button (11)Sabbath mode symbol
(4) Down button (12)Menu symbol
(5) Alarm button (13)SuperFrost symbol
(6) Power failure symbol (14)Alarm symbol
(7) DEMO symbol (15)Celsius symbol
(8) Temperature display
3.2 Temperature display
The following is displayed in normal operation:
-
the freezer temperature set
The temperature display flashes:
-
the temperature setting has been changed
-
once switched on the temperature is not cold enough
-
the temperature has risen by several degrees
The following displays indicate malfunction. Possible
causes and corrective actions: (see 7 Troubleshooting.) .
-
The SuperFrost symbol
Fig. 2 (13) flashes together with
the temperature display.*
-
F0 to F9*
-
The power failure symbol
flashes.
4 Start-up
4.1 Switch on the device
u
Open the door.
u
Press the On/Off button
Fig. 2 (1) .
w
The temperature display lights up. The appli-
ance is switched on.
w
If “DEMO” appears on the display, 'demons-
tration mode' is activated. Contact Customer
Service.
Controls and displays
* Depending on model and options 5