Operating instructions

5 Operation
5.1 Temperature display unit
The temperature display can be changed from °F to °C.
5.1.1 To change the unit
u
To activate setting mode: Press and hold the
SuperFrost button
Fig. 2 (2) for approx. 5 s.
w
The Menu symbol Fig. 2 (12) lights up.
w
S is displayed in the temperature display.
u
Using Up button
Fig. 2 (3) / Down button Fig. 2 (4)
select °.
u
To confirm: Briefly press the SuperFrost button
Fig. 2 (2) .
w
The temperature unit is displayed.
u
To confirm: Briefly press the SuperFrost button
Fig. 2 (2) .
w
° flashes.
u
To exit setting mode: Press On/Off button
Fig. 2 (1) .
-or-
u
Wait 5 minutes.
w
The temperature is again displayed in the temperature
display.
5.2 Child-proof lock
You can use the child-proof lock to lock the
buttons. This means that children cannot acci-
dentally switch off the appliance when playing.
5.2.1 Switching on the child-proof lock
If this function is to be switched on:
u
To activate setting mode: Press and hold the
SuperFrost button
Fig. 2 (2) for approx. 5 seconds.
w
In the display, the Menu Symbol Fig. 2 (12) is displayed.
w
S flashes on the display.
u
Using the Up Fig. 2 (3) or Down button Fig. 2 (4) , select
c .
u
Confirm briefly by pressing the SuperFrost button
Fig. 2 (2) .
w
c1 appears on the display.
u
Confirm briefly by pressing the SuperFrost button
Fig. 2 (2) .
w
The Child Safety symbol
Fig. 2 (10) lights up
on the display.
w
c flashes on the display.
w
The Child Safety function is activated.
To stop setting mode:
u
Press the On/Off button
Fig. 2 (1) briefly.
-or-
u
Wait for approx. 5 mins.
w
The temperature is again displayed on the temperature
display.
If the function is to be switched off:
u
To activate setting mode: Press and hold the
SuperFrost button
Fig. 2 (2) for approx. 5 seconds.
w
In the display, the Menu Symbol Fig. 2 (12) is displayed.
w
S flashes on the display.
u
Using the Up Fig. 2 (3) or Down button Fig. 2 (4) , select
c .
u
Confirm briefly by pressing the SuperFrost button
Fig. 2 (2) .
w
c0 appears on the display.
u
Confirm briefly by pressing the SuperFrost button
Fig. 2 (2) .
w
The Child Safety symbol goes out
w
c flashes on the display.
w
The Child Safety function is deactivated.
To stop setting mode:
u
Press the On/Off button Fig. 2 (1) briefly.
-or-
u
Wait for 5 mins.
w
The temperature is again displayed on the temperature
display.
5.3 Door alarm
If the door is open for longer than 180 seconds,
the acoustic warning sounds.
The acoustic warning stops automatically when
the door is closed
5.3.1 Switching off the door alarm
The acoustic warning can be switched off when the door
is open. The acoustic warning remains switched off as
long as the door is open. When the door is closed, the
alarm function is active again.
u
Press Alarm button Fig. 2 (5) .
w
The door alarm stops.
5.4 Temperature alarm
If the freezer temperature is not cold enough,
the audible warning sounds.
At the same time, the Alarm symbol Fig. 2 (14)
will flash.
The cause of a temperature being too high may be:
-
Hot fresh food was placed in the appliance.
-
When sorting and removing food from the appliance,
too much warm ambient air got in.
-
Prolonged power outage
-
The appliance is faulty.
The audible warning automatically ceases, the Alarm
symbol
Fig. 2 (14) goes out, and the temperature display
stops flashing when the temperature is cold enough
again.
If the alarm status remains: (see 7 Troubleshooting.) .
Operation
6 * Depending on model and options