Assembly and installation instructions

4 Appliance dimensions
Fig. 1
5 Recess dimensions
This is an under-worktop appliance and is installed below
the worktop. The kitchen cabinet surrounding the appli-
ance must be designed exactly in accordance with the
specified dimensions and must allow sufficient air circula-
tion to ensure correct operation of the appliance.
Fig. 2
The declared energy consumption was determined with a
kitchen cabinet depth of 560 mm. The appliance is fully
functional with a kitchen cabinet depth of 550 mm but will
have a slightly increased level of energy consumption.
u
Check the wall thickness of adjacent cabinets: It must
be at least 5/8 in. (16 mm).
u
Align the cabinets with a spirit level and a try square. If
necessary level them by putting something underneath
them.
u
Ensure that the floor and the side panels of the cabinet
are at right angles to each other.
6 Cabinet door
-
A door is required for the kitchen cabinet.
-
The door must be at least 5/8 in. (16 mm) and
maximum 3/4 in. (19 mm) thick.
-
There must be a gap of at least 1/8 in. (3 mm) between
the door and the cupboard door above it (if there is
one).
-
The width of the cabinet door depends on the style of
the kitchen and the size of the gap between the door
panels of the cupboard. Normally a vertical gap of
1/8 in. (3 mm) should be left between the cabinet
doors.
-
If there are other cabinets the top edge of the cabinet
door should be at the same height as the doors on the
adjacent cabinets.
-
The cabinet door must be assembled flat and free from
tension.
Appliance dimensions
4 * Depending on model and options