Assembly / Installation Guide

Fig. 11
u
Check all screws and retighten if necessary.
u
Re-fit the covers.
8 Installing the appliance in the
recess
WARNING
Risk of fire due to short circuit!
u
When inserting the appliance into the recess do not
squash, jam or damage the power cable.
u
Do not operate the appliance with a faulty power cable.
NOTICE
Risk of damage to the hinges!
The hinges could be damaged if the appliance gets
caught on the door when it is being moved.
u
Always hold onto the body when relocating and moving
the appliance.
The following accessories are available from Customer
Services for installing the appliance in a recess:
Set to restrict the door opening angle
to 90°
There is the risk of injury when doing this! Obey the
safety instructions!
u
Observe the explanation of symbols during installation.
9 Installation
All fasteners are supplied with the appliance.
Fig. 12
Make sure you have the following tools on hand:
q
Cordless screwdriver Torx® 15, 25
q
Hex wrench 13
q
Torx® 15 screwdriver
q
Slot screwdriver 6
q
Allen key 8
q
Tape measure
q
Pencil
q
String
q
Spirit level
WARNING
Risk of fire due to short circuit!
u
When inserting the appliance into the recess do not
squash, jam or damage the power cable.
u
Do not operate the appliance with a faulty power cable.
NOTICE
Risk of damage caused by water condensate!
u
For Side-by-Side installation, freezer and refrigerator
side by side, always install the freezer on the right side
of the refrigerator (seen from the front). No condensate
forms between the appliances thanks to the side wall
heating system foamed in on the left.
Make sure the electrical sockets can be accessed.
Installing the appliance in the recess
8 * Depending on model and options