Design Guide

14
Top fastening:
• Whentheadjustingfeetarescrewedoutcomplete-
ly, the appliance sits slightly tensioned below the
worktop.
•Nogranitetop.
Undercounter
Toe Kick Panel
The toe kick installation will be different depending on
the cabinets where the appliance is installed. A toe kick
panel will be required to cover the gap between the venti-
lation grill and the floor.
A stainless steel adjustable toe kick is provided with the
unit. A custom panel toe kick can also be used.
Toe kick can be placed along the front of a row of cabi-
nets including the appliance if the toe kick does not cover
the ventilation openings and maintains the 1-3/8" air flow
gap shown on the previous page.
A cut-out in the toe kick panel is necessary when the
toe kick covers the ventilation openings of the ventilation
grille.
If the cabinets do not have a toe kick, a toe kick can be
prepared and fitted just in front of the appliance.
Fastening Method Appliance - Cabinet
Side fastening:
• Installationbelowhardworktopssuchasgranite.
• Withtheadjustingfeetcompletelyscrewedout,the
appliance is lower than the counter top.