Operating instructions Wine storage cabinet Page 12 GB 7083 593-01 WK
Disposal notes Climate rating The climate rating indicates the room temperature at which the appliance may be operated in order to achieve full refrigeration performance. The appliance contains reusable materials and should be disposed of properly - not simply with unsorted household refuse. Appliances which are no longer needed must be disposed of in a professional and appropriate way, in accordance with the current local regulations and laws.
Safety instructions and warnings • To prevent injury or damage to the unit, the appliance should be unpacked and set up by two people. • In the event that the appliance is damaged on delivery, contact the supplier immediately before connecting to the mains. • To guarantee safe operation, ensure that the appliance is set up and connected as described in these operating instructions. • Disconnect the appliance from the mains if any fault occurs. Pull out the plug, switch off or remove the fuse.
Setting up • Avoid positioning the appliance in direct sunlight or near cookers, radiators and similar sources of heat. Operating and control elements • The floor on which the appliance stands should be horizontal and level.Compensate for uneven floors with the adjustable feet. • Do not cover ventilation openings or grille.
Storing wine Door open alarm GB If you are storing wine for long periods of time, it should be stored at a temperature of between 10°C and 14°C. If the door is left open for more than 60 seconds, the audible warning signal will sound. The following drinking temperatures are recommended for the various types of wine. The alarm switches back to standby when the door is shut. This is the temperature wine cellars are kept at, and it is just right to allow wine to mature properly.
Additional functions In set-up mode you can set the child lock and adjust the brightness of the display. The child lock is designed to protect the appliance from being switched off accidentally. Activating the child lock Press Adjusting the display brightness Press for 5 seconds. Display = Display = Display = Display = Display = for 5 seconds. Display = Display = Use buttons and to select the desired setting.
Interior light The interior light will always switch on when the appliance door is opened. Press the Light button if you want the interior light to be on even when the door is closed. Changing the tube Pull out the mains plug! Labels GB The appliance is supplied with a label holder with labels for each shelf. Use these to label the type of wine stored on each shelf. Additional labels can be obtained from your dealer. Version 1 Click the label holder into place and slide the label in from the top.
Storage diagrams for 750 ml Bordeaux bottles Number of bottles WKb 4212 WKb 1812 17 WKb 3212 WKb 1812 32 17 The storage capacity stated is only possible with the grid shelves in this configuration. Total 66 bottles Important The maximum load per grid shelf is 45 kg. Number of bottles WKb 4212 32 Number of bottles WKb 3212 33 40 33 44 33 44 33 36 18 36 Total 164 bottles Total 200 bottles Important The maximum load per grid shelf is 60 kg.
Defrosting Malfunctions GB The appliance defrosts automatically. • F1 appears in the display. – The appliance has suffered a fault. Contact the customer service department. Cleaning You may be able to rectify the following faults by checking the possible causes yourself. Before cleaning always switch off the appliance. Pull out the mains plug or switch off or unscrew the fuse. • Clean the inside and outer walls with lukewarm water and a little detergent.
Changing over door hinges Door hinges should only be changed by a trained expert. Changing the door hinges must be done by two people. 1. Remove screw from lower hinge bracket. 9 8 1 7 7. Unscrew the pin. Use the spanner provided. 8. Transfer the covers to the opposite side. 9. Screw in the pin on the opposite side. 2. Open the door approx. 45° and lift upwards.
GB 16 16. Screw the screw into the pin again and tighten. 12 12. Screw hinge bracket into place. Adjusting the lateral tilt of the door If the door is at an angle, adjust the angle. 13 13. Insert the pin into the left-hand door mounting. Use your index finger to hold the pin while you are assembling the door. 17 17. Remove middle screw from hinge bracket. This screw is no longer needed. 14. Locate the door on the upper pin as shown in the illustration and guide it to the lower hinge bracket.
