Use and Care Manual For Wine Cooler WS 17800 7085 359-02
Thank you for your trust Congratulations on your purchase of this wine cooler. In buying this product, which is distinguished by its perfect user-friendliness, impeccable reliability and high quality, you have chosen a top-of-the-line appliance. We wish you a lot of pleasure with your new wine cooler - and a lot of enjoyment from your wines. The features on your appliance have been designed to ensure maximum convenience day in, day out.
Table of contents Keep these operating instructions in a safe place and pass them on to the next owner, where applicable. Contents Page Safety.................................................................................................................. 4 Disposal of old appliance.............................................................................. 4 Electrical safety............................................................................................. 4 Important safety information.
Safety Please Read and Follow these Instructions These instructions contain Danger, Warning and Caution notes. This information is important for safe and efficient installation and operation. Always read and comply with all Danger, Warning and Caution notes! DANGER! Danger indicates a hazard which will cause serious injury or death if precautions are not followed. WARNING! Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Safety Important safety information Safety regulations Follow the cautions and safety warnings throughout this instruction manual including the following: The appliance is designed to cool and store wine and beverages. It is designed as a household appliance. • To prevent injury to you or damage to the unit, the appliance should be unpacked and set up by two people. The appliance is set to operate within specific ambient temperature limits according to its climate rating.
Unpacking Safety instructions and warnings CAUTION! The wine cooler Wines only develop their full flavor and aroma when they are at the right temperature for drinking. • To avoid risk of personal injury or property damage, have two people unpack and move this appliance into place. In your wine cooler, wines can be brought slowly and evenly to the ideal drinking temperature. • Protect the finished floor surface before you uncrate the unit.
Features Description of the appliance Lock Activated charcoal filter Interior light (LED light strip) Pull-out shelves Operating and control elements Activated charcoal filter Interior light (LED light strip) Pull-out shelves Activated charcoal filter Interior light (LED light strip) Pull-out shelves Model plate Adjustable-height feet Setting up Place the appliance in its final position at the place of installation.
Operation Operating and control elements Temperature display The electronic control panel uses touch capacitance technology. Any function can be activated by touching the corresponding icon. Upper compartment temperature display Middle compartment temperature display The exact contact point is between the symbol and its label Lower compartment temperature display These symbols indicate which compartment is active so that its temperature can be adjusted.
Operation Setting the temperature Door open alarm The temperature of all compartments can be set separately. If the door is left open for more than 180 seconds, the audible warning signal will sound. Use the Zone button to select the compartment whose temperature you wish to adjust. If the door must be opened for a lengthy period to place items into the appliance, cancel the audible warning signal by pressing the Alarm button. The symbol indicates which compartment is active.
Operation Setup mode = Display brightness In the setup mode you can activate the following functions: Adjusting the display brightness Press = Sabbath mode for 5 seconds. Display = = Display brightness = Temperature display mode = Child lock = Sabbath Mode This feature considers the Religious requirements on Sabbath or Holidays. When the Sabbath Mode is active some functions of the electronic controls are switched off. • The lighting remains off.
Operation = Temperature display mode You can choose the unit of temperature for the display in degrees Fahrenheit or degrees Celsius. Note The factory setting is degrees Fahrenheit. = Child lock The child lock is designed to protect the appliance from being switched off and the temperature setting from being changed accidentally. Activating the child lock Press Press for 5 seconds. Display = for 5 seconds. Display = Display = Display = Display = Display = Display = Display = = Exit setup mode.
Wine cooler compartment Interior light The interior of the appliance is lit by an LED light strip at the top of each compartment. The interior light will always switch on when the appliance door is opened. The interior light will go out approx. 5 seconds after the door is closed. Press the Light button if you want the interior light to be on even when the door is closed. Note This function applies to the lighting of all three compartments. Furthermore, the brightness of the lighting can be adjusted.
Wine cooler compartment Presentation shelf The middle pull-out shelf in the top compartment can be used for the presentation of wine bottles or to keep opened bottles at the perfect temperature. The presentation shelf can be used in all three zones. Inserting the wooden shelf Fit the upper wooden shelf again for using the presentation shelf for storing bottles normally (with the segments not raised). The wooden shelf above it must be removed so that the presentation shelf can be used.
Defrosting/Cleaning Storage diagram Defrosting for 0.75 l Bordeaux bottles to standard NF H 35-124 The wine cooler compartment defrosts automatically. Cleaning Number of bottles WARNING! 7 • To prevent possible injury due to an electrical shock, be sure to disconnect the power cord or turn off the circuit breaker before cleaning the appliance. 13 13 • To avoid injury or damage, do not use steam cleaning equipment to clean the appliance.
Troubleshooting Your appliance is designed and manufactured for a long life and reliable operation. If a problem occurs during operation, check whether it is due to an operating error. Please note that even during the warranty period, some repair costs may be your responsibility.
Reversing the door hinges Door hinges should only be changed by a trained expert. Changing the door hinges must be done by two people. WARNING! WARNING! The appliance door weighs 66 lbs (30 kg). Do not perform this procedure if you are not able to lift this weight. Failure to follow this instruction may result in death or serious injury. 1 Perform the procedures step by step and follow all given instructions. Be sure all screws are screwed tight.
Reversing the door hinges WARNING! Do not move the front section of the soft stop mechanism in the direction indicated when the safety bracket has been removed. The hinge may be closed suddenly by the strong integrated spring mechanism. This can cause serious hand or finger injuries. 7. Remove red safety bracket. 7 11. Remove screw. 12. Pivot soft stop mechanism outwards on the right, pull to the right and remove. 12 11 13. Slide spacer to the left and remove. 14.
Reversing the door hinges 22. Release cover with a small screwdriver and remove. 22 19 19. Remove set screw from hinge bracket and thread 3 to 4 turns into the hinge pin. 20 23 The door must now be held secure by somebody. 23. Unscrew lock and re-fit on the opposite side. 20. Pull out hinge pin. 21 24 21. Tilt door slightly to the side and remove by lifting upwards. 24. Click cover into place.
Reversing the door hinges 31 31. Re-fit locking bracket on the opposite side. 27 27. Push on pressure plates until they engage. 32 32. Re-fit hinge bracket on the opposite side. Insert screws in the marked openings. WARNING! Put the door in a safe place after modification and secure from tipping. Failure to follow this instruction may result in death or serious injury. 28. Release covers on the inside, slide them towards the outside and remove. 33 28 34 28 33.
Reversing the door hinges 36 36. Pull hinge pin upwards and unscrew it from the adjustable foot. 37 42 37. Pull adjustable foot downwards to remove. 42. Screw hinge bracket into place. 38. Unscrew hinge bracket. 38 43. Fit adjustable foot from underneath and attach hinge pin to it. 43 39 39. Transfer fastener for soft stop mechanism on hinge bracket to the opposite side. 40. Transfer cover to the opposite side. 40 44. Insert pin fully into hinge bracket and tighten adjustable foot by hand.
Reversing the door hinges 46 49 49. Move soft stop mechanism hinge to the fastener. 46. Insert hinge pin. 47 50 Front view of top hinge bracket 50. Insert pin. 51. Remove red safety bracket. 47. Push in hinge pin until groove in the pin lines up with bore hole in the hinge bracket. 51 52. Click cover into place. 52 48 48. Undo screw in hinge pin and screw into bore hole in hinge bracket. 53 53. Place the appliance in its final position at the place of installation.
Reversing the door hinges Adjusting the lateral tilt of the door If the door is at an angle, adjust the angle. 54 54. Release cover on the inside and slide to the outside. 55. Turn cover downwards. 55 Front view of top hinge bracket 56. Undo screws and slide hinge bracket to the right or left. Tighten screws. 56 Re-fit cover following the instructions above in reverse order. Close door and check that it is aligned with the side walls of the appliance.
For Service in the U.S. Liebherr Service Center Toll Free: 1-866-LIEBHER or 1-866-543-2437 Email: Service-appliances.us@liebherr.com PlusOne Solutions, Inc. 3501 Quadrangle Blvd, Suite 120 Orlando, FL 32817 For Service in Canada Liebherr Service Center Toll Free: 1-888-LIEBHER or 1-888-543-2437 www.euro-parts.ca EURO-PARTS CANADA 39822 Belgrave Road Belgrave, Ontario, N0G 1E0 Phone: (519) 357-3320 Fax: (519) 357-1326 *708535902* w w w. l i e b h e r r - a p p l i a n c e s .
