User Manual

25
GB
11. Remove screw.
12. Pivot soft stop
mechanism out-
wards on the right,
pull to the right and
remove.
13. Slide spacer to the left and re-
move.
8
9
10
11
12
13
17
18
8. Compress the cover in centre and release.
Remove cover.
9. Transfer plate to other side of cover.
10. Slide red safety bracket over
the hinge.
14. Turn spacer through
180° and re-t on the
opposite side.
15. Rurn soft stop mechanism
through 180° and re-t on the oppo-
site side. Then secure both parts with the
screw.
16. Remove red safety bracket.
Refer to warning in point 7.
An arrow is visible on the inside of the cover
near its centre.
This must point upwards when tted.
Note for tting bottom door cover
17. Position cover and screw into place.
18. Slide red safety bracket over the hinge.
14
15
16