User Manual

22
Equipment
Presentation shelf
The middle pull-out shelf in the top compartment can be used
for the presentation of wine bottles or to keep opened bottles at
the perfect temperature. The presentation shelf can be used in
all three zones.
The wooden shelf above it must
be removed so that the presen-
tation shelf can be used. Raise
and remove the shelf.
Pull the presentation shelf for-
wards as far as it will go.
The front section of the pres-
entation shelf consists of two
segments which can be raised
separately.
Raise the segment and pivot the two supports
downwards.
Bottles can be stored behind the
raised segment.
Inserting the wooden shelf
Fit the upper wooden shelf again for using the presentation shelf
for storing bottles normally (with the segments not raised).
Extend the pull-out rails as far as they will go.
Place the wooden shelf with its bore holes face down on the pins
on the pull-out rails.
Labels
The appliance is supplied with one
label for each wooden shelf.
Use these to label the type of wine
stored on each shelf.
Additional labels can be obtained from
your dealer.
Click the label holder into place and
slide the label in from the side.
Air exchange with activated charcoal lter
The way in which wines continue
to mature depends on the ambient
conditions. The quality of the air is
therefore decisive for preserving
the wine.
We recommend that you replace
the illustrated lter once a year.
Filters can be obtained from your
dealer.
Changing the lter
Ta k e t h e  l t e r b y t h e h a n d l e . Tu r n i t
90° to the left or right and remove.
Inserting the lter
Insert with the handle in a vertical
position. Turn it 90° to the left or
right until it clicks into place.
Safety lock
The lock in the appliance
door is equipped with a safety
mechanism.
Locking the appliance
• Insert the key as shown by
arrow 1.
• Turn the key 180°.
To unlock the appliance, the
same procedure must be re-
peated in the same order.