Use and Care Manual

17
Pre
-
Operating Instructions: Generator Setup
CAUTION: Any attempt to start the generator before it has been properly serviced may
result in engine failure
and void warranty.
ADD ENGINE OIL: Refer to the diagrams below.
1. Place generator on level surface.
2. Clean area around Oil Hole Dipstick/Plug & Unscrew Oil Hole Dipstick/Plug.
3. Fill with appropriate type and amount. Refer to Chart below for recommended oil type based on
Environmental temperature.
NOTE: Refer to “Product Specifications” section for universal recommended oil type and oil amount.
4. Replace Oil Hole Dipstick/Plug and tighten securely.