Manual

620
10 3
In case of a reverse, the reverse radar
system will inform the driver of the
distance between the vehicle and the
barrier by the indicator and buzzer.
This system is working when the ignition
key is at position “On”and the shift
lever at reverse gear.
10 4
Reverse radar system
620
This system informs the driver of the
distance between the vehicle and the
barrier by the indicator and buzzer.
During a reverse, the three ultrasonic
probes (active probe) detect the distance
between the vehicle tail and the barrier,
then BCM processes the data and transmits
it to the instrument module which then
drives a step- by-step alarm indicating
sound and approaches light display.
The maximum induction scope for the
sensor is 1,500mm.
A-- Distance
(mm)
Indicator
Alarm
Induction scope
Warning
No attaching accessories or other
objects to the sensor components;
otherwise, it will disturb the correct
operation of the system or even cause
an accident.
1, 500—9 00
90 0—600
600 or less
than 250
rd
The 3 line
illuminates
nd rd
The 2 and 3
lines illuminate
All lines glitter
Interrupted buzz
Fast inter rupt ed
buzz
Continuous buzz
The system will not wok normally
under the following circumstances.
●Ice, snow and slurry stick to the
sensor.
●A long-time parking under a
high-temperature or low-temperature
condition.
●Driving on a bumpy road, muddy road
or a road with high grass.
●Close to the horn of other vehicles and
the engine of motorcycles or any other
object that can produce ultrasonic.
●Equipped with twin-channel wireless
antenna or fender pile.
●Heavily knocking the sensor.
The system may not work in case
the sensor contacts the following
objects.
●Metal lead, cord or other thin objects
●Cotton, snow or absorptive objects
●Small objects
●Objects with sharp edges
●High and bulgy objects
Please contact the service
station to check the system in case
of the following situations.
Lifan
●Indicator illuminates continuously
but the buzzer does not sound
Note
The reverse radar system is only used
to assist the reverse. Do not rely on this
system too much. Observe the
surrounding situation when reversing
the vehicle.
A
●A sloping center of gravity.
●Covering the sensor by hands.
●Too close to an object.
●Sunken bumper
Instru cti on Manual of Lifan Sedan
LIFAN
Instru cti on Manual of Lifan Sedan
Instru cti on Manual of Lifan Sedan
LIFAN
Chongqing Lifan Passenger Vehicle Co., Ltd.
Chongqing Lifan Passenger Vehicle Co., Ltd.