User's Manual

3
Installation
REAR OF
CONSOLE
2
3
2
CONNECT THE POWER
SUPPLY INTO AN
UN-SWITCHED
AC OUTLET
ON OFF
Place the console in a CENTRAL location in your home. Be sure
it is on a at, stable surface away from other electrical devices (i.e.
cordless phones, fans, radios, uorescent lamps, etc.).
AFFECTS ON TRANSMITTER SIGNAL RANGE
It’s important to properly position your console within your home.
Since console is wireless communication based, the console relies solely on
adequate cellular reception within the installation area in order to function.
Plug the power supply into an
un-switched 120 VAC power outlet
(an outlet that is not controlled by a wall switch).
Turn unit ON.
2
3
1
LIGHT CONCRETE
OR BRICK
65% - 95%
OF FULL POWER
10% - 70%
OF FULL POWER
SCONCRETE WITH TEEL
REINFORCEMENT OR
METAL LATH AND PLASTER
WALLBOARD AND
WOOD STUDS
90% - 100%
OF FULL POWER
CONSTRUCTION
MATERIALS WILL
AFFECT SIGNAL RANGE
WRONG!
RIGHT
CENTRALLY LOCATE CONSOLE
TRANSMITTERS AT THE
OTHER END OF THE HOUSE
MIGHT BE TOO FAR AWAY
CONSOLE LOCATION WILL
AFFECT SIGNAL RANGE
Life Alert HELP Pers_v3.indd 3 5/1/14 1:24 PM