CORPORATE HEADQUARTERS 5100 River Road Schiller Park, Illinois 60176 + USA. §47.288.3300 + FAX: 847 288.3703 Service phone number: 800.351.3737 {toll-free within U.S.A, Canada) AMERICAS North America Life Fitness Inc. 5100 N River Road Schiller Park L HIE LSA Telephone: (347) 288 3300 Fax: (847) 268 4703 Service Telephone: (800) 361 3737 Service Ema, custcmersuppori@iiefinss com Liabilities cor Operating Hours: 760 pm (CST) Brazil Life Fitness Basil Au.
FCC Warning Possible Radio / Television Interference Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant fo part 16 of the FCC rules. These limits are designed fo provide reasonable protection against harmful interference in a residential installation.
Tale oF CONTENTS 3.10 6.4. Important Safely INSTRUCTIONS «LL. 5 C117C3 Upright Lifecycle® Exercise Bike Overview 7 ASSIDUITY oh 8 Tools & Hardware LL 8 Packaging 0 Assemble the Rear Stabilizer 10 Assemble the MONOGAMIST LLL. ccc 10 Connect Wiring F Aha ch COVE LL a 11 Assemble the Seat and Seal Post... Accessory Trays and CONSOLE LL. LL 12 Assemble the Handlebar... 13 Pedals 14 C1 Water Bottle Holder and Bracket 14 IHE SEINE Ls 15 Main Features . LL... 17 ACCBSSOMIBS L.
This Operation Manual describes the functions of the following product Life Fitness Upright Lifecycle® Exercise Bike Models: Tactic Thank you for purchasing a Life Fitness bike. Before using this product please read this user manual in its entirety to ensure that you have the knowledge to safely and properly operate all of the features on your bike.
1 IMPORTANT SAFETY INSTRUCTIONS WARNING: Read all instructions before using the Life Fitness Life cycle exercise bike. Save these Instructions. WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death if you feel faint stop exercising immediately.
Use this product in a well-ventilated area. Use this product on a solid, level surface. Make sure that all components are fastened securely. An appliance should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, of injury to persons.
Upright LiFecvcLe® Exercise Bike OVERVIEW Leveler Console C1 with A 3 Track Console C3 with Track Console Console Water Bottle Holder / Accessory Tray Leveler
3 ASSEMBLY 3.1 Too Ls & HARDWARE Identify the following components after unpacking your Life cycle. Hem Quantity Description 50mm Button Head Screw 2 2 2 20mm Button Head Screw 3 2 2 100mm Hex Head Bolt 4 5 5 Thick Flat Washer 16mm O.D. 5 2 2 60mm Hex Head Bolt é é 4 12mm Small Head Phillips Screw 7 4 4 Flat Washer 12mm 0.0.
THD (jm 50mm Button Head Screw 20mm Button Head Screw 100mm Hex Head Bolt WH 6 Go 60mm Hex Head Bolt 12mm Self-Tapping Screw Shylock Nut {on seat) Flat Washer {on seat) Thick Flat Washer -16mm O.D. Flat Washer -18mm O.D. Flat Washer -12mm O.D.
3.2 PACKAGING Parts: None Remove all packaging and place main components to the side of the box. Break box down in each of the four comers. 3.
3.5 Connect WIRING / ATTACH COVER Parts: Hardware Bag #3 (4, 12mm Phillips Screws) (4, Flat Washers) Tools: Philips Screwdriver Detach the WIRE TIE (H} attached fo the front of the MONO COLUMN (E). Carefully pull the CONSOLE WIRE (L) through the SIDE ACCESS HOLE (M) of the MONO COLUMN (E}. Feed the CONSOLE WIRE through the GROMMET (N) as shown and insert the GROMMET into the SIDE ACCESS HOLE.
3.7 Accessory TRAYS & CONSOLE Parts: Hardware Bag #5 {2, 8mm Phillips Screws) {4, 12mm Self-Tapping Screws) Tools: Phillips Screwdriver €3 Only: Locate the ACCESSORY TRAY (V). Position the ACCESSORY TRAY near the top of the MONO COLUMN (E) at the DISPLAY CONSOLE BRACKET (W). While holding the CONSOLE WIRE (X) and HEART RATE WIRE (Y), cul the wire tie securing the CONSOLE WIRES fo the DISPLAY CONSOLE BRACKET. Feed the CONSOLE WIRES through the center hole of the ACCESSORY TRAY MOUNTING BRACKET (Z}.
3.8 Assemble THE HANDLEBAR Parts: Hardware Bag #6 (4, 15mm Button Head Screws) (4, Flat Washers) Tools: Smm Hex Head Wrench locate the HANDLEBAR ASSEMBLY (CC). With the handlebars facing forward, position the HANDLEBAR ASSEMBLY near the top of the MONO COLUMN (E}. Connect the WIRES (DD) leading from the HANDLEBAR ASSEMBLY and the COLUMN. Slide the HANDLEBAR ASSEMBLY fully into the MONO COLUMN.
3.9 Peals Tools: 15mm Open End Wrench Locate the RIGHT PEDAL (EE) (marked with an "R") and PEDAL STRAP {FF} (marked with an With the side of the PEDAL STRAP marked with an "R” facing upward, slide the slotted end of the PEDAL STRAP through the [eft soot in the PEDAL. Fasten one of the slots onto the tab located under the left soot of the PEDAL.
4 Inimical Setup Read the entire User Manual before setting up the Life cycle exercise bike. WHERE TO PLACE THE EXERCISE BIKE Following all safety instructions in Section 1.1, move the bike to the location in which it will be used. See Section 7, Specifications, for the dimensions of the footprint.
How To Adjust THE PEDAL STRAPS The bike pedal safely straps keep the user's shoes on the pedals during a workout. The straps should fit comfortably, but they also should be tight enough! to prevent shews from slipping at any paint in the pedaling rotation. Before working out, the user should fest and adjust the tightness of the straps. The straps can be adjusted fo fit a variety of shoe sizes.
5 Main FEATURES 5.14 ACCESSORIES Two accessory trays (A) are mounted above the handlebars on the 3 to provide storage for items such as water bottles, personal stereos, and cell phones. A Water Bottle Holder (B) is located on the mono column of the C1. Additionally, an integrated Reading Rack {C} for supporting a book or magazine is located at the base of the console. 5.2 Contact Heart RATE The hand pulse sensors (I) are a built-in heart rate monitoring system on the stationary handlebar.
6 Service & Product MAINTENANCE 6.1 TROUBLESHOOTING age ie ith Cause / Solution Check to see that the power cord is fully plugged into the back of the Life cycle exercise bike and into the wall. Make sure the power cord is fully seated into the back of the Life cycle exercise bike. You may be in “Energy Saver Mode”. Press the “Energy Saver” button to No power. see if the console turns on. Verify that all customer assembly connections are working properly. Unplug and re-plug each connection to verify.
Ho [TE TT “OFF” is displayed in the LEVEL window on the console. The contact heart rate sensors are riot reading my heart rate correctly, Turn the unit off and then on again. If power cycling the product did not work, there is a problem with the resistance system, Contact Customer Support Services for assistance. Be sure to grasp the sensors firmly and keep hands still. If heart rate seems substantially higher or lower than expected, remove hands from sensors until heart rate disappears.
6.2 PREVENTIVE MAINTENANCE Tips The Life Fitness Life cycle exercise bike is backed by the engineering excellence and reliability of Life Fitness and is one of the most rugged and trouble-free pieces of exercise equipment on the market today. Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until the defective parts are required or replaced. Pay special attention fo parts that are subject to wear. as outlined below.
6.3 Preventive MAINTENANCE SCHEDULE ITEM WEEKLY MONTHLY BI-ANNUALLY Console Overlay Clean inspect Bottle Holders Clean Inspect Console Mounting Bolts Inspect Frame Clean Inspect Plastic Covers Clean Inspect Inspect Life pulse Sensors Clean / Inspect Pedals and Straps Clean Inspect 6.4 How To O Stain PRODUCT SERVICE 1. Please contact your dealer or Life Fitness Customer Service at 1-800-351-3737 2. Verify the symptom and review the operating instructions and troubleshooting matrix. 3.
7 SPECIFICATIONS Lire Freshness C1 7 C3 Upright LirecveLe® Exercise Bikes Designed Use: Home Max User Weight: 300 Ibs. / 136 kg. (C1) 400 Ibs. 1 181 kg. (C3) Pedal Size: 4.5in. / 11.5 cm. Drive Type: Poly -V belt-drive Power Requirements: 120 Volt 220 Volt (Europe), 240+ Volt (Australia) Note: The C3 can be self-powered with the Go Console.
8 WARRANTY INFORMATION Limited Lifetime 3 Years: ©1713 Upright Electrical Parts & Life cycle Base Mechanical Parts WHAT IS COVERED: This Life Fitness consumer product (“Product”) is warranted {o be free of all defects in material and workmanship. WHO 1S COVERED: The original purchaser or any person receiving a newly purchased Product as a gift from the original purchaser.
HOW TO GET PARTS & SERVICE: Refer to page one of this manual for your local service contact information, Reference your name, address and the serial number of your Product {consoles and frames may have separate serial numbers). They will tell you how fo get a They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located.