LCD Entertainment System Specification Sheet

M051-00K32-A084

Life Fitness LCD Entertainment System

How To Replace the Main PC Board

Special service tools required: none

1. Disconnect the three cables from the back of the

console. The power cable and the coax cable are

screw-on connectors.

2. Remove the four screws that secure

the TV console to the support frame.

3. Remove the TV console assembly.

Antenna

Coax

Cable

Power

Cable

Tan 10-Pin Connector

(for remote control)

Black 8-Pin Connector

(for in-console control)

PAGE 1
Life Fitness LCD Entertainment System How To Replace the Main PC Board Special service tools required: none 1. Disconnect the three cables from the back of the console. The power cable and the coax cable are screw-on connectors. Antenna Coax Cable Power Cable Tan 10-Pin Connector (for remote control) OR Black 8-Pin Connector (for in-console control) 2. Remove the four screws that secure the TV console to the support frame. 3. Remove the TV console assembly.
PAGE 2
Life Fitness LCD Entertainment System How To Replace the Main PC Board - continued CAUTION! Before replacing any circuit board, ground yourself using an anti-static ground strap. 4. Remove the four screws securing the back of the TV console. 5. Separate the front and back halves of the console. 6.
PAGE 3
Life Fitness LCD Entertainment System How To Replace the Main PC Board - continued 7. Remove the four screws that secure the main PC board to the bracket. 8. Lift out the main PC board. Note: For Version 1 units, remove and discard the static PCB and all attached cables. 9. Reverse steps 1 through 8 to install the new main PC board. On Version 1 TVs, connect the remote cable to the 10-pin connector as shown in the diagram on the previous page.