OWNER’S MANUAL Network 3D Blu-ray Disc™ / DVD Player Please read this manual carefully before operating your set and retain it for future reference. BP620 P/NO : SAC35374703 www.lg.
Getting Started Safety information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. FCC Compliance Statement This device complies with part 15 of the FCC rules.
Getting Started Notes on Copyrights 1 Getting Started yy Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected content.
Getting Started IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Table of Contents Table of Contents 2 Safety information 1 Getting Started 8 8 12 12 12 13 14 14 Introduction – Playable discs and symbols used in this manual – About the “7” symbol display – Compatibility notes – File requirement – AVCHD (Advanced Video Codec High Definition) – About DLNA – Certain system requirements – Regional code Remote control Front panel Rear panel 2 Connecting 15 15 16 16 17 18 18 Connecting to your TV – HDMI connection – What is SIMPLINK? – Video/Audio (Left/Right) co
Table of Contents 47 48 48 49 49 49 Viewing information from Gracenote Media Database Using the Premium Using the LG Apps – Signing in – Managing my Apps – Searching online content 5 Troubleshooting 50 50 51 52 52 52 Troubleshooting – General – Network – Picture – Customer Support – Open source software notice 6 Appendix 53 Controlling a TV with the Supplied Remote Control – Setting up the remote to control your TV Network software update – Network update notification – Software update About Nero M
Getting Started Introduction 1 Playable discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Description yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. yy BD-R/RE discs that are recorded in BDAV format. Blu-ray y u i r DVD-ROM yy BD-R/RE discs that contain Video, Audio or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
Getting Started File requirement Video files 1 Getting Started File Location File Extension Disc, USB “.avi”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free), “.vob”, “.3gp” XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt) “.
Getting Started ,,Note yy The file name is limited to 180 characters. yy Maximum files/Folder: Less than 2000 (total number of files and folders) ,,Note yy A “avi” file which is encoded “WMV 9 codec” is not supported. yy This player supports UTF-8 files even it contains Unicode subtitle content. This player can not support the pure Unicode subtitle files. yy File compatibility may differ depending on the server. yy Depending on the types of file or ways of recording, it may not play back.
1 Getting Started About DLNA Regional code This Player is a DLNA Certified digital media player that can display and play movie, photo and music content from your DLNA-compatible digital media server (PC and Consumer Electronics). This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
Getting Started 13 Remote control • • • • • • a • • • • • • B (OPEN/CLOSE): Opens and closes the disc tray. 0-9 numerical buttons: Selects numbered options in a menu. CLEAR: Removes a mark on the search menu or a number when setting the password. REPEAT (h): Repeats a desired section or sequence. • • • • • • b • • • • • • c/v (SCAN): Searches backward or forward. C/V (SKIP): Goes to the next or previous chapter / track / file. Z (STOP): Stops playback. d (PLAY): Starts playback.
Getting Started Front panel 1 Getting Started a Disc Tray f Z (STOP) b Display Window g 1 (POWER) c Remote Sensor h USB Port d B (OPEN / CLOSE) e N (PLAY / PAUSE) Rear panel a AC power cord e VIDEO OUT b LAN port f 2CH AUDIO OUT (Left/Right) c DIGITAL AUDIO OUT (OPTICAL) d HDMI OUT
Connecting Connecting to your TV Make one of the following connections, depending on the capabilities of your existing equipment. yy HDMI connection (page 15) yy Video connection (page 16) HDMI connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMI™ Cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Connecting ,,Note yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17) 2 Video/Audio (Left/Right) connection Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable.
Connecting Resolution setting The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. 1. Press HOME (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection.
Connecting Connecting to an amplifier Make one of the following connections, depending on the capabilities of your existing equipment. Connecting to an amplifier via HDMI output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable.
Connecting 19 Connecting to an amplifier via Digital Audio Output Connecting to an amplifier via 2 Channel Audio Output Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in jack (OPTICAL) on your amplifier using an optional digital audio cable. Connect the Left and Right 2CH AUDIO OUT jacks on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system using audio cables.
Connecting Connecting to your home network 2 Broadband service Connecting This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and online content services.
Connecting 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). Network will automatically be connected to the unit. Advanced Setting If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1. Use W/S to select [Wired] and press ENTER (b). 2. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically.
Connecting Wireless network connection Wireless network setup Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment. For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow.
Connecting 23 Advanced Setting If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1. Use W/S to select [Wireless] and press ENTER (b). ,,Note yy WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network. 4.
Connecting Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 25 USB device connection This player can play video, audio and photo files contained in the USB device. Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. ,,Note yy This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (audio, photo, video). However, for BD-Live and Audio CD recording, only FAT16 and FAT32 formats are supported.
System Setting Settings Initial setup 5. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language and network settings on the initial setup wizard. 1. Press 1 (POWER). The initial setup wizard appears on the screen. 2. Use W/S/A/D to select a display language and press ENTER (b). 6.
System Setting 27 Adjust the setup settings [DISPLAY] menu You can change the settings of the player in the [Setup] menu. TV Aspect Ratio 1. Press HOME (n). Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. [4:3 Pan Scan] Select when a standard 4:3 TV is connected.
System Setting Resolution HDMI Color Setting Sets the output resolution of the HDMI video signal. Refer to page 17 for details about the resolution setting. Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [Auto] [YCbCr] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. Select when connecting to a HDMI display device.
System Setting 29 [LANGUAGE] menu [AUDIO] menu Display Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. Select a language for the [Setup] menu and onscreen display. Disc Menu/Disc Audio/ Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. Press ENTER (b) to select another language.
System Setting Sampling Freq. (Digital Audio Output) [192 kHz] Select this if your A/V Receiver or Amplifier is capable of handling 192 kHz signals. [96 kHz] Select this if your A/V Receiver or Amplifier is not capable of handling 192 kHz signals. When this choice is made, this unit automatically converts any 192 kHz signals to 96 kHz so your system can decode them. [48 kHz] 3 System Setting Select this if your A/V Receiver or Amplifier is not capable of handling 192 kHz and 96 kHz signal.
System Setting [LOCK] menu DVD Rating The [LOCK] settings affect only Blu-ray Disc and DVD playback. Blocks playback of rated DVD based on their content. (Not all discs are rated.) To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password.
System Setting [NETWORK] menu Deactivate Vudu The [NETWORK] settings are needed to use the software update, BD-Live and online content services. You can deactivate your player from your Vudu account. It is recommended that you do this if you give your player to someone else who should not share your Vudu account. Connection Setting If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication.
System Setting 33 [OTHERS] menu Network Play This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to [On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information.
Operating General playback Playing a disc erot Using [HOME] menu 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. The home menu appears when you press HOME (n). Use W/S/A/D to select a category and press ENTER (b). 2. Press B (OPEN/CLOSE) to close the disc tray. For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 3. Press HOME (n). 4. Select [Movie] or [Music] using A/D, and press ENTER (b). 5.
Operating 35 Playing Blu-ray 3D disc e Enjoying BD-Live™ e This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. BD-ROM supporting BD-Live that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet. Preparation In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: yy Check your TV is 3D capable and has HDMI input(s). 1.
Operating Playing a file on a network server yui Wi-Fi Direct™ connection This player can play video, audio and photo files located in a DLNA server through your home network. yui 1. Check the network connection and settings (page 20). 2. Press HOME (n). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select a DLNA media server on the list using W/S, and press ENTER (b).
Operating 37 ,,Note When you connect this unit from other Wi-Fi Direct devices, PIN connection method is not available. 6. Select a server that shared from the connected Wi-Fi Direct™ device using W/S, and press ENTER (b) to navigate the server. Connecting to a Wi-Fi equipped devices yui This player can connect to a general Wi-Fi device using Wi-Fi Direct™ function. 1. Set the [Wi-Fi Direct] option on the [Setup] menu to [On] (page 32). 2. Press HOME (n). 3.
Operating 8. Select a server that shared from the connected Wi-Fi device using W/S, and press ENTER (b) to navigate the server. Basic operations for video and audio content To stop playback Press Z (STOP) while playback. To pause playback Press M (PAUSE) while playback. Press d (PLAY) to resume playback. To select a server from the device list, files or folders must be shared by DLNA server from the connected device. 9. Select a file using W/S/A/D, and press ENTER (b) to play the file.
Operating 39 Basic operations for photo content To play a slide show Press d (PLAY) to start slide show. To stop a slide show Press Z (STOP) while slide show. To pause a slide show Press M (PAUSE) while slide show. Press d (PLAY) to re-start the slide show. To skip to the next/previous photo While viewing a photo in full screen, press A or D to go to the previous or next photo. The unit records the point where you pressed the Z (STOP) depending on the disc.
Operating Advanced playback Repeating a specific portion eroty Repeat playback erotu y This player can repeat a portion you have selected. During playback, press REPEAT (h) repeatedly to select a desired repeat mode. Blu-ray Disc / DVD / Video files jA- – Selected portion will be repeated continually. 2. Press ENTER (b) at the end of the portion. Your selected portion will be repeated continually. 3. To return to normal playback, press REPEAT (h) repeatedly to select [Off ].
Operating 41 Changing content list view yui Selecting a subtitle file y On the [Movie], [Music] or [Photo] menu, you can change the content list view. If the subtitle file name is different from the video file name, you need to select the subtitle file on the [Movie] menu before playing the movie. Method 1 Press red (R) colored button repeatedly. 1. Use W/S/A/D to select the subtitle file you wish to play in the [Movie] menu. 2. Press ENTER (b).
Operating Options while viewing a photo i You can use various options during viewing a photo in full screen. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2. Select an option using W/S. Listening to music while slide show i You can display photo files while listening to audio files. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2.
Operating 43 On-Screen display 2. Select an option using W/S. You can display and adjust various information and settings about the content. 4. Press BACK(1) to exit the On-Screen display. Displaying content information on-screen eroy 1. While playback, press INFO/MENU (m) to show various playback information. 3. Use A/D to adjust the selected option value. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs.
Operating Playing from selected time eroy Hearing a different audio eroy 1. Press INFO/MENU (m) during playback. The time search box shows the elapsed playing time. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”. Press A/D to skip the playback 60 seconds forward or backward.
Operating 45 Changing the TV Aspect Ratio eoy Changing the Picture Mode eroy You can change the TV aspect ratio setting while playback. You can change the [Picture mode] option while playback. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Use W/S to select the [TV Aspect Ratio] option. 2. Use W/S to select the [Picture Mode] option. 3. Use A/D to select desired option. 4.
Operating Audio CD recording You can record one desired track or all of the tracks in Audio CD to a USB storage device. 1. Insert a USB storage device to the USB port on the front panel. 2. Press B (OPEN/CLOSE), and place an Audio CD on the disc tray. Press B (OPEN/CLOSE) to close the disc tray. The playback starts automatically. 3. Press INFO/MENU (m) to display the option menu. 4. Use W/S to select [CD Recording] option, and press ENTER (b). 5.
Operating 47 Viewing information from Gracenote Media Database The player can access the Gracenote Media Database and loads the music information so that Track name, Artist Name, Genre and other text information can be displayed on the list. Audio CD When you insert an Audio CD, the player starts playback automatically and load the music title from the Gracenote Media Database. If there is no music information from the database, music titles will not appear on the screen. Audio file 2.
Operating Using the Premium Using the LG Apps You can use various content services via Internet with the Premium feature. You can use the LG application services on this player via Internet. You can easily find and download various applications from LG App store. 1. Check the network connection and settings (page 20). 2. Press HOME (n). 3. Select the [Premium] using A/D, and press ENTER (b). Depending on the region, the LG Apps service may not be available at the moment.
Operating 49 Signing in Searching online content To use the [LG Apps] feature, you need to sign in with your account. If you are having difficulties finding specific content from online services, you can use the all-in-one search function by entering keywords in the [Search] menu. 1. On the [LG Apps] or [My Apps] screen, press red (R) colored button. 2. Fill the [ID] and [Password] field using the virtual keyboard. If you do not have an account, press red (R) colored button to register. 3.
Troubleshooting Troubleshooting General Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Place the disc with the playback side down. yy Place the disc on the disc tray correctly inside the guide. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting 51 Network Symptom Cause & Solution BD-Live feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 20). yy Your broadband speed may not fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Troubleshooting Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts.
Appendix 53 Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. By pressing You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. MUTE Turn the TV’s volume on or off. PR/CH W/S Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV Depending on the unit being connected, you may not be able to control your TV using some of the buttons.
Appendix Network software update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Software update You can update the player using the latest software to enhance the products operation and/or add new features.
Appendix 55 4. If newer version exists, the message “Do you want to download it?” appears. 5. Select [OK] to start update. (Selecting [Cancel] will end the update.) 6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition) 7. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 8. Select [OK] to start updating.
Appendix About Nero MediaHome 4 Essentials yy 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors Nero MediaHome 4 Essentials is a software for sharing video, audio and photo files stored on your computer to this player as a DLNA-compatiable digital media server. yy Windows® Internet Explorer® 6.0 or higher ,,Note yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not be inserted in this player or in any product other than a PC.
Appendix 57 9. If you want to take part in the anonymous collection of data, select the check box and click the [Next] button. 10. Click the [Exit] button to complete the installation. MAC OS X 1. Start up your computer, and insert the supplied CD-ROM disc into your computer’s CD-ROM drive. 2. Browse the CD-ROM drive and open the “MediaHome_4_Essentials_MAC” folder. 3. Double-click the “Nero MediaHome.dmg” image file. The Nero MediaHome window is opened. 4.
Appendix Area code list Choose an area code from this list.
Appendix 59 Language code list Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix Trademarks and licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. 6 Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a trademark of DTS, Inc. Product includes software.
Appendix Gracenote®, Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote, Inc. in the United States and/or other countries. Music recognition technology and related data are provided by Gracenote®. Portions of the content is copyright © Gracenote or its providers. Gracenote® End User License Agreement This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”).
Appendix Cinavia Notice This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
Appendix 63 Audio output specifications Jack/Setting OPTICAL (DIGITAL AUDIO OUT) *3 Analog 2CH Output PCM Stereo DTS Re-encode *4 BitStream Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Dolby TrueHD PCM 2ch PCM 2ch DTS Dolby Digital DTS PCM 2ch PCM 2ch DTS DTS DTS-HD PCM 2ch PCM 2ch DTS DTS Linear PCM 2ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 2ch DTS PCM 2ch Linear PCM 7.
Appendix yy The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD while playback. yy You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV receiver) accepts using [Digital Output] and [Sampling Freq.] options on the [Setup] menu (see page 29). yy With digital audio connection (DIGITAL AUDIO OUT or HDMI OUT), Disc Menu button sounds of BD-ROM may not be heard if the [Digital Output] option is set to [BitStream].
Appendix 65 Specifications General Power requirements Refer to main label on the rear panel. Power consumption 12 W Dimensions (W x H x D) Approx. 430 x 41 x 197 mm (16.9 x 1.6 x 7.8 inches) Net Weight (Approx.) 1.6 kg (3.5 lbs) Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) 2CH AUDIO OUT 2.
Appendix Maintenance Notes on discs Handling Discs Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution.
Appendix 67 Important information relating to network dervices All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it ori
