Installation Manual

Step 1: Layout & Mark-Out

Start Point for

Manual Opening

36”

Minimum Distance

Pool Edge

2-3’ O the Pool Edge

Fig. 1

Fig. 2

Start Point: Is the manual opening to enter the pool area. See Fig. 1 Use the double hole on the section

template provided and mark your rst hole 1L Fig. 3. 1L is for the 1st pole of the full section going to the

left side of the pool.

Fig. 4

Now, place the template over the mark 1L that you just marked and mark your next hole, 1R Fig. 4.

1R is for the 1st pole of the full section going to the right side of the pool.

**If using a self-closing gate, skip this step and refer to the instructions included in the gate box.

1L 1R

Layout: The fence should be a minimum 2’ off the pool edge. See Fig. 1 & Fig 2

Fig. 3