Installation Manual

Step 3: Drilling and Inserting Ground Sleeves
Recommended Drill Guide: We have an optional drill guide that will help you with drilling holes needed
for proper installation.
Align: The drill guide over the marked hole with the bubble level pointing to
the pool edge. (See Fig. DG1)
Level: The drill guide. The three bolts attached to the bottom of
thebase allow the user to level the drill guide. Simply turn the bolts
clockwise or counter clockwise. (See Fig. DG2)
Lean: The guide either away from the pool, toward the pool, or at the zero mark for level drilling. To
adjust the pitch simply loosen the upper wingnuts on either side of the drill guide. (See Fig. DG3 & DG4)
Bubble in middle indicates
Drill Guide Base is level.
Drill Guide Base leveling bolts. There are 3
bolts to adjust.
DG1
DG2
DG3
DG4
After adjustment has been made be sure to
tighten wingnuts back down firmly.
Heavy or Light Lean: The tick marks on the side
of the drill guide by the wing nut will show you
what a heavy lean is and what a light lean is.
(See Fig. DG5) below.
DG5
Level
light
lean
Leveling Bolt
Leveling Bolt
Pool
HEAVY
LEAN