ell git mt Td le eel cleaner | Mauve joined mil ions of opiate to get the cloning done in high efficiency. This manual helps you ta keep your vacuum cleaner performing at Its best.
Contents 1. Important Safety Instructions 2. Important Tips co... 21 Charge the Battery... 2.2 assembly and Storage 3. Product Parts List... 4, Product Parts Schematic 5. Product Parameters 6. Product Introduction 61 Aluminum: alloy Tube Installation 8.2 Motorized Floor Head Installation Suction Nozzle Installation 8.4 Operating... 7. Maintenance 7.1 Product Maintenance 7.2 Signal Hints 8. Trouble & Resolution 4. Problem Self-checking Q&A 10.
Important Safety Instructions 2 sure constructions = when using electrical appliances, basic softy precautions should always be followed, This application can be used by children aged from 8 year and above and persons with reduced physics, sensory or mental capabilities or ack of experience and knowledge if they hove been given supervision or instruction concerning use of the appliance in a safe way and understand the hoards involved.
Important Safety Instructions s Do not use the appliance to pick up flammable liquid, matches, cigarette ends, hot ashes or any hot booming or smoking objects. The hose should be checked regular and must not be used if damaged. Take care when skipping accessories with rotating ports as this cooed cause entrapment. Switch off the appliance and disconnect it from the mains power supply before changing of fitting accessories.
Important Safety Instructions © Stuyvesant If the battery pock becomes exhausted gimmicky after fully charged, it shooed be removed from the product to ovoid leakage. In the event of the battery pack leaking, do not slow any liquid to come into contact with the skin or eyes, If the contact has bean made, wash the affected area with copious amounts of water and seek medical advice. Keep the battery puck out of the reach of children, Do not love battery packs on charge for prolonged periods of time.
Important Safety Instructions A WARNING | ) Reid all safety warnings and Instructions. Allure to follow the warnings and Instructions may result In electric shook, fire and/or serious Injury. 1. Prevent unintentional starting. Ensure the switch is in the off position before connecting to the battery pock, picking up or carrying the appliance. Carrying the conception with your finger on the switch or energizing appliance that have the switch on invites accidents.
important Tips ee Two ways to charge the battery » Charge the battery after putting it to the appliance. (wa recommend this charging way since the LED indicator on the appliance show charging status.) = Charge the battery directly.
Important Tips CE Three steps to assemble the stick vacuum cleaner: 1. Connect the motorized Hoo head to the end of aluminum folly tube.
Product Parts List Two Ways to Store s Hang on the wall mounting bracket. What's in the box? = Attach the main body to the stick to stand on the floor. Please check off all the successors are In the package box, Ham me Mie Brolly Aluminum &loy Tube Motored Floor Head Power Adapter Warranty Curd. User Mani Cloning Brush Wall Mounting Bracket 200 Bastion Nose.
Product Parts Schematic Honda —— oy Battery Indicator Spare Bristle Roller Brush XT] 2in1 Suction Nozzle Main Body Rel suss Button Aluminum alloy Tube Cleaning Brush ; i a Wal Mounting Bracket Motorized Floor Head For Friars diets, SASE Visa Hew Anne am 2
Product Parts Schematic Alt Vent Power Switch / Working Mode Switch Dusted: Du stoup Hd Sorrel Button Power Adapter 8 For more details, pleonasm visit www sinecure
Product Parts Schematic iw Hook for Main Body Sorrels Button Rotating Whee! Detachable FUR Brush Motorized Door Head: Ult in LED For more tolls, pace visit ww sine corm ©
Product Introduction Aluminum-alloy Tube Installation = Push the aluminum-clioy tube end into the suction port of the main body in the horizontal direction. Make sure there is no looseness. The hearing of “click” indicates a successful installation. (as picture shows) detach the ube, press the scoreless buttonwood pu the tube out. (os picture shows) Motorized Floor Head Installation = Push the motorized floor head into the snip-fit joint of the aluminum-airy tube.
Product Introduction Attach this tool to the end of aluminum-alloy tube or main body of vacuum cleaner directly, so you can handle most of the cleaning tasks in house and cars. Step 1. Preparation Please make sure the battery power is sufficient before using it. It's recommended to change for § hours before its first use. Step 2 Operate Choose the right accessory for o specific task. Adjustable two modes meet different needs. Press the on/off switch to make the volume cleaner work in normal mode.
Maintenance Product Maintenance it's suggested to do some maintenance to max its performance os well as prolong its service fife. 0 Main Body Maintenance (Handheld Part) @ Please stop the appliance before cleaning it. € scrub the appliance with water or neutral detergent. Mike sure the cloth is wrung before the scrubbing and prevent the water from flowing Into the Inner machine. @ Do not place the appliance in sunlight or wet places after cleaning.
Maintenance © Clean the Filter Kit To keep the best performance of the appliance, we recommend cleaning the filter kit every week, and rinsing It at least once per month, Tips: 8 steps to clean the fighter kit 1. Press the release bunion to open the dustbin lid. 2. Rotate the filter cover anti-clockwise and take it out downwards, with the fighter element. 3. Take the filter sentiment out of the filter cover, 4. Wash the filter cover and fighter element under the faucet 5.
Maintenance © Motorized Floor Head Cleaning It is recommended to clean once after every 4 to B times the use of the fur head, @ Tum off the power switch, @ Take off the Motorized Floor Head. © Take out the Puffy brush. @ Unplug the cover of the fluffy brush's head, clean up the dirt and hereon it € Put the firefly brush buck into the floor head. ¥ The indicator shows the remaining battery once pressing the power on switch, ¥ The Indicator light flashes when the remaining power is lower than 5%.
Trouble & Resolution Common Allure Analyses and Treatment Symptom Possible Souse Solution 1. Low battery. vacuum cleaner 2 The main body's air oes wor vent is blocked. 1. Charge the battery. 2. Can up the suction inlet. 1. Tha stoup and fighter components 1. Clean up the stoup Product suction are dusty. and filter components. wakens : 2. Cleo up the brush head 2 The brush head was : blocked with Hair, and other accessories. . Pa 1. Clean up the blockage, Motor hos Mari suction inlet 2.
Problem Self-Checking Q&A Stop working Leer bad Weak Suction suddenly malfunction Charging issues “Check if the product | Thermostat “Check # the Check if the barberry Is assembled protection triggered | product Is Is assembled comely. {places by rotor assembled correctly. (Places assemble the overheating (cool forsooth.
Problem Leif-checking Q&A Stop working Floor head Nook Suction suddenly malfunction Charging ls suss “ls the battery “Is the battery “The floor head “Hot when power enough? | power sough? turns but the LED | charging the {auction maybe Pleistocene doesn't work? LED | battery? {recharge influenced by after recharging” | lights but fur it after cooling.
Disposal Information ‘The battery used with this device must not be disposed of in horsehide waste, The device and the battery must be disposed of proper. The housing of the battery must never ba opened, ond must be disposed of as a show, This product is subject to the provisions of European Directive 20819/EC.
