Instructions / Assembly

63(&,),&$7,21$1'35,&(68%-(&772&+$1*(:,7+287127,&(,0$*(6$5()255()(5(1&(21/<ZZZ/LIHDUW&DELQHWU\FRP

www.LifeArtCabinetry.com

Info11

/D\WKHIDFHIUDPHSDUW)RQDÀDW

clean surface. Run a bead of wood

glue in all dado. Do the same for the

side panels (Part A and C).

2) There are two methods to assemble

the box.

a. The brackets that are supplied

can be used to attach the side panels

to the face frame.

b. Use a 1/4 inch crown by 5/8

inch long staples and staple the side

panel/face frame joint together.

3) Slide the bottom panel (Part H) into

the bottom dado and use the square

L-brackets to attack the bottom panel to the frame and side panels.

4) Slide the back panel (Part B) into the back dado. Use the square L-brackets to attach the bottom

panel and the back panel underneath. Use the long L-brackets to attach the back panel to the side

panel near the top of the box.

5) Install the plastic L-brackets to the pre drill holes on the back panel. Slide the drawer slides into

place and secure by screwing the front part down to the face frame. Slide the drawers into place on

the slide.

6) Attach the doors (Part E) to the face frame using the face frame hinges provided. Adjust as nec-

essary using the adjustment screws.

7) Attack toe kick plate (Part M) with square L-brackets.

8) Position the shelf pins to the desired height and place shelf (Part G) on top of the shelf pins.

Assembly Instruction For

Framed Base Cabinet