Instructions / Assembly

63(&,),&$7,21$1'35,&(68%-(&772&+$1*(:,7+287127,&(,0$*(6$5()255()(5(1&(21/<ZZZ/LIHDUW&DELQHWU\FRP

www.LifeArtCabinetry.com

nfo14

Assembly Instruction For

Frameless Base Cabinet

1) Begin by opening the box and

laying all the pieces out on a clean,

ÀDWVXUIDFH&KHFNWRPDNHVXUHDOO

content are in the box (hinges and

shelf pins will be packaged separately

in its own plastic bags).

2) Lay the left side panel (Part A)

down with dado and predrill holes

facing up. Apply wood glue to predrill

holes for dowels and dado.

3) Attach the two bridge boards (Part

F) and the bottom panel (Part H) into

the predrill holes with the laminate

facing out.

4) Attach the right panel (Part C) by aligning the two cross pieces and the bottom panel into the

predrill holes. Attach using brad nails and nailing the pieces together.

5) Slide the back piece (Part B) into the dado. Use the long L-bracket to attach the back panel to

the side panels.

6) Attach the drawer slides to the side panels using the predrill holes as guides. Attach the drawer

box to the slides using the predrill holes as guides.

7) Attach the doors (Part E) using the hinges that are supplied. Make adjustment using the adjust-

able screws on the hinge.

8) Attach the toe kick (Part M) by using the brad nails.

9) Position the shelf pins to the desired height and place shelf (Part G) on top of the shelf pins.