User Guide

www.lifebreath.com 12
5 TIMERS AND REPEATERS
Depending on the type of HRV installation, you may have timers in areas such as restrooms. The
timer will override the operational mode (regardless of the setting) and initiate HIGH fan speed
Ventilation. Upon completion of the timer cycle, the HRV will return to your selected operational
mode and fan speed setting.
20/40/60 Minute Wireless Timer (99-DET02):
(1) Select Button
(2) 20/40/60 minute status lights
(3) Red LED battery indicator
Press the Select Button on the timer to initiate high speed ventilation
for 20, 40, or 60 minutes. The 20/40/60 minute status lights indicate
high speed operation. To cancel the high speed fan operation, press
the Select Button until the 20/40/60 minute status lights are no longer
illuminated.
When the battery in the timer needs to be replaced, the red LED
Battery Indicator will illuminate.
When paired to the digital wall control, the wireless timer may be
moved to a remote location in the home such as a bathroom. Wireless
timers have an estimated range of 40 ft with no obstructions.
Replacing the Timer Battery:
(4) Battery
(5) Face plate
(6) Back plate
a) Remove the face plate by separating
it from the back plate. On the back
of the face plate the battery will be
exposed.
b) Replace the battery and re-attach
the face plate to the back plate.
Attention
•
Be careful not to damage the tabs on the back plate when re-attaching the face plate.