Install Instructions

Included Lifebreath Digital Control - Part #99-DXPL02
Key Features:
7
Instruction Card
Mode
Button
Dehumidistat
Button
RESET Button
20/40/60 High
Speed Button
Digital Control Operating Instructions (DXPL02):
Turning on the Control
Press and release the ON/OFF button . The light above will illuminate.
Setting the Ventilation
Speed
Press and release the Fan button to select one of the 5 fan speeds. The fan speed will be displayed on the screen beside the
Fan symbol . Standby mode (Fan OFF) is indicated as speed 0. The fan will turn ON if required by a remote Timer (if installed).
20/40/60 High Speed Button
Press and release the 20/40/60 High Speed button to temporarily initiate HIGH Fan speed for 20, 40 or 60 minutes. Press
once for 20 minutes, twice for 40 minutes, 3 times for 60 minutes and 4 times to disable. The will appear on the screen and
the corresponding section of the clock will flash to indicat
e the time interval selected. When the timer runs out, the unit will return
to it's previous operating speed.
Setting the Mode of Operation
There are 5 modes of operation available wi
th the DXPL02 control. Pressing the Mode button will cycle through the different
modes of operation and they will be displayed on the screen.
ON/OFF
Button
Fan Speed
Button
 5 speed fan setting
 Standby setting (fan speed 0)
 Electronic Dehumidistat
 20/40/60 HIGH speed override button
 Compatible with 99-DET02 Wireless Timers
 Easy to read backlit LCD screen
 Slim-line design
 Connect to 3 wire 20 gauge low voltage wire
 Five selectable modes of operation
• Continuous Ventilation
• 20 min. Ventilation / 40 min. Recirculation
• 20 min. Ventilation / 40 min. OFF
• 10 min. Ventilation / 50 min. OFF
• Continuous Recirculation
 Service indicator
20/hr
40/hr
10/hr
50/hr
20/hr
40/hr