User Manual

11
Step – 7: Adjust the UV Chamber housing and Align the holes for the locking screws. You may need to adjust the Pump to
UV Chamber Adapter so the screws align properly (see Fig – 9C) while the “O” ring for the Internal UV Housing and the
“O” ring of the Pump to UV Chamber Adapter make a proper seal (as shown in Fig – 9A). Once the pump and the UV
Chamber Housing are aligned correctly the screw holes will fall in place (see Fig – 9B). Install the screws.
Step – 8: Replace the Biological Media Bag. The Biological Media bag (Item # 10) should be by the UV Chamber Opening
opposite the Pump Replacement Base. Follow Step – 1, Step – 2, and Step – 3 to install the layers and Fountain
Assembly.
R440028 13 WATT UV STERILIZER KIT
Upgrade your Uno, Duo, Trio Filters with a 13 Watt UV to control Algae and Disease Control. Complete easy-to-install unit
shipped direct from factory.
To Add a UV Sterilize or for any replacement parts – Please call the manufacturer at:
Lifegard Aquatics
16301 Carmenita Road
Cerritos, CA 90703
Tel [phone]
Fax [phone]
Email: [e-mail] Web Site: www.lifegardaquatics.com
Item Part No. Description
11 R442011 UV Chamber
12 R442012 UV Chamber Screws
13 R442013 13 Watt UV Bulb
14 R442014 13 Watt UV Ballast Assembly
15 R442015 UV Quartz Sleeve
16 R442016 Gasket for UV Quartz Sleeve
17 R442017 “O” Ring for Internal UV Housing
19 R442019 UV Light Cover with Nut
Fig
–
9A
Fig
–
9B
Fig
–
9C